SFPs m. erw. Temp.

This managed layer 2 and layer 3 switch in 19-inch format provides 24 copper ports 10/100/1000BaseT with RJ45 plus PoE and PoE+, complemented by four SFP/SFP+ ports for 1G/10G. The backplane delivers 128 Gbit/s and operation is fanless across a range of -40 to +75 C. Power is fed with 90-264 VAC at 50-60 Hz and with 48-57 VDC, redundantly and with at least 50 VDC for PoE+; consumption is a maximum of 26 W without PoE, and with PoE 348 W on AC feed only and 720 W on AC/DC or DC-only feed. Configuration runs over console, web GUI, mini USB and SNMP v1, v2c and v3, with static routing for IPv4 and IPv6 unicast, RIP v1/v2 and PTP to IEEE 1588 V2. A switching contact with DO up to 1 A at 24 VDC and a DI input is fitted, and configuration and firmware can be uploaded automatically via USB. The housing measures 440 x 44 x 331 mm, and MTBF is 266'508 h at 25 C and 158'506 h at 40 C. 19-inch switch, fanless24 x 10/100/1000BaseT with PoE and PoE+, RJ454 x SFP/SFP+ 1G/10G, 128 Gbit/s backplanePower supply 90-264 VAC and 48-57 VDC, redundantLayer 3 routing, RIP v1/v2, PTP IEEE 1588 V2Operating temperature -40 to +75 C

Aimed at applications with high data loads such as video over IP and video streaming, this fanless 19″ switch with WebSmart management suits smaller installations thanks to its reduced range of functions. Its eight 10/100/1000TX copper ports with RJ45 deliver PoE+ to 802.3af (15W) and 802.3at (30W) with a maximum of 130W across all ports, while two SFP slots for 100/1000 serve the uplink. Cameras powered over PoE are monitored continuously: after a failure the switch restarts the camera and raises an SNMP alarm if the restart fails or if excessive power is drawn. The unit is ring-capable, offers a 20GBit/s backplane and an 8k MAC table, and is configured through a web GUI as well as SNMPv1, v2c and v3; no console port and no layer 3 functions are included. It is fed with 100-240VAC at 50-60Hz, drawing a maximum of 10W without PoE and 150W with PoE, works from 0°C to 50°C, measures 220 x 242 x 44mm and weighs 2.1 kg net. 19″ switch with WebSmart management, fanless, ring-capable8 x 10/100/1000TX with PoE+, max. 130W for all ports2 x SFP 100/1000 uplinkCamera and PoE monitoring with SNMP alarmBackplane 20GBit/s, MAC table 8kPower supply 100-240VAC, 50-60Hz

Dimensioned for networks with heavy data loads such as video over IP and video streaming, this managed 19″ layer 2 switch with DMS combines 24 copper ports of 10/100/1000TX with RJ45 and PoE+ to 802.3af/at, with a maximum of 370W available across all ports. Four SFP slots for 100/1000 act as uplinks and an RS232 console port with RJ45 completes the access options. Cameras fed by the switch are monitored and restarted automatically after a failure; if that does not succeed, or if excessive power is requested, an SNMP alarm is issued. The backplane delivers 56GBit/s, the MAC table holds 8k entries, and configuration runs over console, web GUI and SNMPv1, v2c and v3. Power comes from 100-240VAC at 50-60Hz with a maximum draw of 40W without PoE, the switch operates from 0°C to 50°C, measures 442 x 211 x 44mm and weighs 3.4 kg net. 19″ switch, layer 2, managed, ring capable, DMS24 x 10/100/1000TX with PoE+ 802.3af/at, max. 370W4 x 100/1000 SFP and RS232 console port, RJ45Camera and PoE monitoring with SNMP alarmBackplane 56GBit/s, MAC table 8kPower supply 100-240VAC, 50-60Hz

This 19″ layer 2/3 switch is built for applications with high data volume such as video over IP and video streaming, including multicast, and its compact format and reduced port count suit smaller installations or a remote position within a larger network. Ten copper ports of 10/100/1000TX with RJ45 are provided together with two combo ports usable either as SFP for 100/1000 or as 10/100/1000TX with RJ45; an RS232 console port with RJ45 is fitted, PoE is not. Layer 3 functions cover static routing for IPv4 and IPv6 unicast, and VLAN support includes 802.1Q tagging with up to 255 VLAN groups, Q-in-Q and private VLAN. A 20GBit/s backplane and jumbo frames up to 9600 bytes, also at 100MBit/s, address video transmission with all ports occupied, while the MAC table holds 32k entries. The ring-capable switch runs on 100-240VAC at 50-60Hz with a maximum of 25W, works from 0°C to 40°C, measures 220 x 134 x 44mm and weighs 1.6 kg net. 19″ switch, layer 2/3, managed, ring-capable10 x 10/100/1000TX, RJ452 combo ports 100/1000 SFP or 10/100/1000TXStatic routing for IPv4 and IPv6 unicastBackplane 20GBit/s, MAC table 32kPower supply 100-240VAC, 50-60Hz, max. 25W

This managed 19″ switch with DMS targets applications with high data volume such as video over IP and video streaming, multicast included, and its management scope also covers complex network requirements. It offers 24 copper ports of 10/100/1000TX with RJ45 plus two SFP slots for 100/1000 as an optical uplink; configuration runs over console, web GUI and SNMPv1, v2c and v3, and an RS232 console port with RJ45 is fitted. At layer 3 it supports static routing for IPv4 and IPv6 unicast, while VLAN handling covers 802.1Q tagging with up to 255 VLAN groups, Q-in-Q and private VLAN; link aggregation to IEEE 802.3ad LACP or as a static trunk provides 18 groups of 8 ports. The backplane delivers 52GBit/s, the MAC table holds 8k entries, and jumbo frames up to 9600 bytes are supported at 100MBit/s as well. Fanless and ring-capable, the switch is fed with 100-240VAC at 50-60Hz, draws 40W at most, works from 0°C to 40°C and measures 442 x 44 x 221mm at 2.8 kg net. 19″ switch, layer 2/3, fanless, ring redundant, DMS24 x 10/100/1000TX, RJ452 x 100/1000 SFP optical uplinkStatic routing for IPv4 and IPv6 unicastBackplane 52GBit/s, MAC table 8kPower supply 100-240VAC, 50-60Hz, max. 40W

Carrying 24 optical ports, this managed 19″ layer 2/3 switch is well suited to linking remote sites such as IP cameras and is designed for heavy data loads including video over IP and video streaming with multicast. Alongside 24 SFP slots for 100/1000 it provides four combo copper ports of 10/100/1000TX with RJ45 and an RS232 console port on DB9 with console cable; PoE is not offered. Its supply is redundant and can be taken from 100-240VAC at 50-60Hz as well as from 48VDC, with a maximum draw of 30W and 102 BTU/h thermal power loss. Static routing for IPv4 and IPv6 unicast is supported, together with 802.1Q VLANs of up to 4k VLAN IDs, Q-in-Q, private VLAN and link aggregation across 26 groups of four ports; the backplane reaches 48 GBit/s with a 32k MAC table. The operating range covers -20°C to 60°C and the chassis measures 442 x 212 x 44mm at 3.2 kg net. 19″ switch, layer 2/3, managed, ring-capable, DMS24 x 100/1000 SFP4 x 10/100/1000TX, RJ45, comboRedundant supply 100-240VAC and 48VDCBackplane 48 GBit/s, MAC table 32kOperating temperature -20°C to 60°C

This managed 19″ layer 2/3 switch pairs 24 SFP slots for 100/1000 with four additional SFP/SFP+ ports for 1G/10G, making it suitable for connecting remote sites such as IP cameras together with a fast uplink. Four copper ports of 10/100/1000TX with RJ45 and an RS232 console port on DB9 including console cable round off the equipment, while PoE is not provided. Power is fed redundantly from 100-240VAC at 50-60Hz and from 48VDC, with 30W maximum consumption and 102 BTU/h thermal power loss. For smooth video transmission with all ports occupied it offers a 128GBit/s backplane, a 32k MAC table and jumbo frames up to 9600 bytes, also at 100MBit/s; configuration runs over console, web GUI and SNMPv1, v2c and v3. The switch operates from -20°C to 60°C, measures 442 x 212 x 44mm and weighs 3.3 kg net. 19″ switch, layer 2/3, managed, ring redundant, DMS24 x 100/1000 SFP4 x SFP/SFP+ uplink at 1G/10G4 x 10/100/1000TX, RJ45Redundant supply 100-240VAC and 48VDCBackplane 128GBit/s, MAC table 32k

This managed 19″ switch with light core operates on layer 2 and layer 3 and is intended for applications with high data loads such as video over IP and video streaming including multicast; extensive security functions protect both the device itself and the network traffic. It provides two copper ports at 1G/2.5G/5G/10G and eight SFP/SFP+ ports for 1G/10G, plus an RS232 console port with RJ45 and console cable; PoE is not included. Besides static routing it supports dynamic methods with OSPFv2/v3 and RIPv1/v2, and administration is available through web GUI, DMS, SNMPv1, v2c and v3, console, Telnet and RMON, with individual management access methods able to be disabled. Backplane capacity is 200GBit/s and the MAC table holds 32k entries. The ring-capable unit is fed with 100-240VAC at 50-60Hz, draws 40W at most, carries a regulated fan, works from 0°C to 50°C and measures 220 x 242 x 44mm at 1.7 kg net. 19″ switch, layer 2 and layer 3, ring-capable, light core2 x copper 1G/2.5G/5G/10G8 x SFP/SFP+ at 1G/10GStatic and dynamic routing, OSPFv2/v3 and RIPv1/v2Backplane 200GBit/s, MAC table 32kRegulated fan, power supply 100-240VAC

Compact and managed with PoE+, this 19″ switch addresses applications with high data volume such as video over IP and video streaming including multicast, and its reduced port count suits smaller installations or a remote position. Eight copper ports of 10/100/1000TX with RJ45 supply PoE+ to 802.3af/at at 30 W and class 0-4 within a PoE budget of 130 W, joined by two combo ports usable as SFP for 100/1000 or as 10/100/1000TX with RJ45 and an RS232 console port with RJ45. Cameras powered over PoE are monitored continuously and restarted automatically after a failure. The backplane delivers 20GBit/s, the MAC table holds 32k entries, and layer 3 functions and ring capability are present. Fed from 100-240VAC at 50-60Hz, the switch draws a maximum of 40W without PoE and 170W with PoE, operates from 0°C to 40°C and measures 220 x 243 x 44mm at 2.4 kg net. 19″ switch, layer 2/3, managed, ring-capable, PoE+8 x 10/100/1000TX with PoE+ 802.3af/at, class 0-4PoE budget 130 W2 combo ports 100/1000 SFP or 10/100/1000TXBackplane 20GBit/s, MAC table 32kPower supply 100-240VAC, 50-60Hz

Developed for networks with high data loads such as video over IP and video streaming including multicast, this managed 19″ switch offers DMS and extensive layer 3 functions. Of its 26 copper ports of 10/100/1000TX with RJ45, 24 carry PoE+ to 802.3af/at, with a maximum of 185W across all ports; two combo ports as SFP for 100/1000 and an RS232 console port with RJ45 complete the connections. Cameras powered over PoE are monitored, restarted after a failure and reported by SNMP if a fault persists. Backplane capacity is 52GBit/s, the MAC table holds 8k entries, and layer 3 covers static routing for IPv4 and IPv6 unicast; configuration runs over console, web GUI and SNMPv1, v2c and v3. Supplied with 100-240VAC at 50-60Hz, it draws a maximum of 40W without PoE and 255W with PoE at 185W, works from 0°C to 40°C, measures 442 x 211 x 44mm and weighs 3.3 kg net. 19″ switch, layer 2/3, managed, ring redundant, DMS26 x 10/100/1000TX, 24 of them with PoE+ 802.3af/atMaximum PoE power 185W for all ports2 combo ports 100/1000 SFPBackplane 52GBit/s, MAC table 8kPower supply 100-240VAC, 50-60Hz

Designed for video networks with heavy data loads, video over IP and video streaming with multicast, this managed 19″ switch with DMS provides 26 copper ports of 10/100/1000TX with RJ45, 24 of which carry PoE+ to 802.3af/at, with up to 370W available across all ports. Two combo ports as SFP for 100/1000 serve the optical uplink and an RS232 console port with RJ45 is fitted. Cameras fed by the switch are monitored continuously and restarted automatically after a failure, otherwise an SNMP alarm is raised. The backplane reaches 52GBit/s with an 8k MAC table, and layer 3 functions as well as ring capability are available. Power is taken from 100-240VAC at 50-60Hz with a maximum draw of 40W without PoE and 450W with PoE at 370W; operation is permitted from 0°C to 40°C and the chassis measures 442 x 211 x 44mm at 3.5 kg net. 19″ switch, layer 2/3, managed, ring-capable, DMS26 x 10/100/1000TX, 24 of them with PoE+ 802.3af/atMaximum PoE power 370W for all ports2 combo ports 100/1000 SFPBackplane 52GBit/s, MAC table 8kThermal power loss 225 BTU/h

This managed 19″ switch with layer 2/3 functions, strong security features and 10GBit/s uplinks is built for applications with high data loads such as video over IP and video streaming including multicast. Eight copper ports of 10/100/1000TX with RJ45 deliver PoE+ to 802.3af (15W) and 802.3at (30W) with a maximum of 250W across all ports, two SFP/SFP+ ports run at 1G/10G, and an RS232 console port with RJ45 is available. The switch monitors PoE-powered cameras continuously and restarts them after a failure; Non Stop PoE and PTP to IEEE 1588 v2 are implemented. Administration covers HTTP/HTTPS, SSH, Telnet client, IPv6 management and SNMP v1, v2c and v3 with traps and USM, alongside web GUI, DMS, console and RMON; the backplane reaches 56GBit/s with a 16k MAC table. Supplied with 100-240VAC at 50-60Hz, the unit draws a maximum of 40W without PoE and 290W with PoE, carries a regulated fan, works from 0°C to 50°C and weighs 2.5 kg net. 19″ switch, layer 2/3, managed, ring-capable8 x 10/100/1000TX with PoE+, max. 250W for all ports2 x SFP/SFP+ at 1G/10GNon Stop PoE, PTP to IEEE 1588 v2Backplane 56GBit/s, MAC table 16kRegulated fan, power supply 100-240VAC

With 24 copper ports of 10/100/1000TX and RJ45 delivering PoE+ to 802.3af (15W) and 802.3at (30W) at up to 370W across all ports, this managed 19″ switch covers larger video networks, while four SFP/SFP+ ports at 1G/10G form the uplink. It works on layer 2 and layer 3, supports DMS and is dimensioned for high data loads such as video over IP and video streaming with multicast, with extensive security features protecting the device and the network traffic. Cameras fed by the switch are monitored continuously and restarted after a failure; Non Stop PoE and PTP to IEEE 1588 v2 are part of the feature set. Access is provided through HTTP/HTTPS, SSH, Telnet client, IPv6 management, SNMP v1, v2c and v3 with traps and USM, as well as web GUI, DMS, console and RMON; the backplane reaches 128GBit/s with a 32k MAC table. At 100-240VAC and 50-60Hz consumption is 40W at most without PoE and 410W with PoE, operation is permitted from 0°C to 45°C, and the chassis measures 442 x 211 x 44mm at 3.7 kg net. 19″ switch, layer 2/3, managed, ring-capable, DMS24 x 10/100/1000TX with PoE+, max. 370W for all ports4 x SFP/SFP+ at 1G/10GNon Stop PoE, PTP to IEEE 1588 v2Backplane 128GBit/s, MAC table 32kRegulated fan, operating temperature 0°C to 45°C

Operating on layer 2 and layer 3, this 19″ switch was developed for applications with high data loads such as video over IP and video streaming including multicast, and extensive security features protect the switch itself as well as the network traffic. It carries 24 copper ports of 10/100/1000TX with RJ45 and PoE+ to 802.3af (15W) and 802.3at (30W) with a maximum of 370W across all ports, plus four SFP/SFP+ ports at 1G/10G and an RS232 console port with RJ45. Cameras powered over PoE are monitored continuously and restarted after a failure, and Non Stop PoE is available. Beyond static routing it supports OSPFv2/v3 and RIPv1/v2; administration runs through web GUI, DMS, SNMPv1, v2c and v3, console, Telnet and RMON, with individual management access methods able to be disabled. The backplane delivers 128GBit/s with a 32k MAC table, and a supply of 100-240VAC at 50-60Hz results in 40W maximum without PoE and 410W with PoE; the unit has a regulated fan, works from 0°C to 50°C and weighs 3.3 kg net. 19″ switch, layer 2 and layer 3, ring-capable24 x 10/100/1000TX with PoE+, max. 370W for all ports4 x SFP/SFP+ at 1G/10GStatic and dynamic routing, OSPFv2/v3 and RIPv1/v2Non Stop PoE, regulated fanBackplane 128GBit/s, MAC table 32k

The highest port count in this range, this 19″ switch provides 48 copper ports of 10/100/1000TX with RJ45 and PoE+ to 802.3af (15W) and 802.3at (30W), with a maximum of 740W available across all ports. Four SFP/SFP+ ports at 1G/10G form the uplink and an RS232 console port with RJ45 is fitted. The device operates on layer 2 and layer 3, is dimensioned for high data loads such as video over IP and video streaming with multicast, and protects both switch and network traffic through extensive security features; cameras powered over PoE are monitored and restarted after a failure, and Non Stop PoE is available. Static and dynamic routing with OSPFv2/v3 and RIPv1/v2 are supported, and administration runs over web GUI, DMS, SNMPv1, v2c and v3, console, Telnet and RMON. Backplane capacity is 176GBit/s with a 32k MAC table; at 100-240VAC and 50-60Hz consumption is 40W at most without PoE and 780W with PoE, operation is permitted from 0°C to 50°C, and the chassis measures 442 x 375 x 44mm at 5.8 kg net. 19″ switch, layer 2 and layer 3, ring-capable48 x 10/100/1000TX with PoE+, max. 740W for all ports4 x SFP/SFP+ at 1G/10GStatic and dynamic routing, OSPFv2/v3 and RIPv1/v2Non Stop PoE, regulated fanBackplane 176GBit/s, MAC table 32k

The RY-LGSPTR23-26 is a managed 19-inch Layer 2/3 switch intended for networks carrying high data loads such as video over IP, video streaming and multicast. It offers 26 copper ports 10/100/1000TX on RJ45, 24 of them with PoE++ to 802.3af/at/bt and a maximum PoE budget of 920W across all ports, plus two combo SFP slots for 100/1000. Cameras powered over PoE are monitored continuously, restarted automatically after a failure and reported by SNMP if the restart does not succeed; the backplane delivers 52GBit/s and jumbo frames up to 9600 bytes are supported at 100MBit/s as well. Static routing for IPv4 and IPv6, up to 255 VLAN groups to 802.1Q including Q-in-Q and private VLAN, and an 8k MAC table cover demanding network structures. Power comes from 100-240VAC at 50-60Hz and can be made redundant with the additional RY-PS-TR920 supply; configuration runs over console, web GUI or SNMPv1, v2c and v3. 26 x 10/100/1000TX, 24 of them with PoE++ 802.3af/at/btMaximum PoE power 920W over all ports2 x 100/1000 SFP (combo)52GBit/s backplane, 8k MAC tableStatic IPv4/IPv6 routing, up to 255 VLAN groupsRedundant 100-240VAC supply, 442 x 330 x 44mm

Designed for data-intensive tasks such as video over IP and multicast streaming, this 19-inch Layer 2/3 switch combines 48 copper ports 10/100/1000TX with PoE+ on RJ45 and four SFP/SFP+ slots for 1G/10G. A maximum of 920W PoE is available across all ports, rising to 1840W with a second power supply unit, while consumption stays at 40W maximum without PoE. The backplane runs at 176GBit/s, the MAC table holds 32k entries, and Non Stop PoE keeps connected devices supplied even while the switch reboots. Management is available over HTTP/HTTPS, SSH, Telnet client, IPv6 management and SNMP v1, v2c and v3 with traps and USM; PTP to IEEE1588 v2 and IEC 61588 is supported. The unit is rated from 0°C to 45°C and is powered from 100-240VAC at 50-60Hz, with redundancy through the RY-PS-TR920 power supply. 48 x 10/100/1000TX with PoE+, RJ454 x SFP/SFP+ 1G/10G, 10GBit/s SFP data rateMaximum PoE power 920W over all ports176GBit/s backplane, 32k MAC tableIEEE 1588 v2 PTP, Non Stop PoE, controlled fanRedundant 110/230VAC supply, 8.4 kg gross