CableDoc
CableDoc is the cabling brand in the catalogue: Cat.6A U/FTP patch cords in lengths from 0.10 to 15 m and seven colours, as a slim version of 3.8 mm diameter, fibre patch cords LC, SC and ST in OM3, OM4 and single-mode with LSZH jacket, Cat.7 installation cable, RJ45 plugs, patch panels and tools.
Every cable variant is an article of its own with length, colour and connector type; the technical data is stated on each article. Trade prices after login.
535 CableDoc products in the catalogue – as an authorised distributor, with technical data, data sheets and trade prices after login.
Designed for 19-inch rack mounting, this blank panel provides room for 24 keystone jacks within one rack unit. The port layout is 24x RJ45, and shielded as well as unshielded keystone modules can be used. Module width has to stay below 17,4 mm. Conformity to RoHS 2.0 and REACH is stated, and the colour is black according to RAL 9001. 19-inch blank panel, 1U24x RJ45Shielded and unshielded keystone modulesModule width below 17,4 mmRoHS 2.0 and REACH compliantRAL 9001 black
In stock, ships immediately · delivery 1-2 days
Occupying a single rack unit in a 19-inch cabinet, this blank panel takes 24 keystone jacks. Its front is laid out for 24x RJ45 and accepts shielded as well as unshielded keystone modules. Modules have to be narrower than 17,4 mm to fit. The panel complies with RoHS 2.0 and REACH, and the finish is grey to RAL 7035. 19-inch blank panel, 1U24x RJ45Shielded and unshielded keystone modulesModule width below 17,4 mmRoHS 2.0 and REACH compliantRAL 7035 grey
Not in stock · delivery 4-5 days
This outlet box takes two RJ45 modules and is listed as an empty-module version, meaning it comes without connection modules already fitted. The outlet is arranged at an angle. The stated colour is RAL 9010. Both module positions are populated with RJ45 modules chosen separately. Empty-module outlet boxAccepts 2xRJ45Angled outletRAL 9010 colour
Not in stock · delivery 4-5 days
This outlet box takes two RJ45 modules and is listed as an empty-module version, meaning it comes without connection modules already fitted. The outlet is arranged at an angle. The stated colour is RAL 9010. Both module positions are populated with RJ45 modules chosen separately. Empty-module outlet boxAccepts 2xRJ45Angled outletRAL 9010 colour
Not in stock · delivery 4-5 days
The Cabledoc keystone jack is a screened connection module for twisted pair cabling (STP). Its transmission class is category 6A / class EA according to ISO/IEC 11801 and EN 50173. The module is specified up to 500 MHz and for 10GBASE-T across a distance of 100 m. It is supplied in the keystone form factor. Category 6A / class EA (ISO/IEC 11801, EN 50173)Specified up to 500 MHz10GBASE-T over 100 mScreened (STP)Keystone module
In stock, ships immediately · delivery 1-2 days
CAT6A STP keystone jack, toolless Packaging unit: 24 pcs. per carton
In stock, ships immediately · delivery 1-2 days
Rated as category 7 / class F to ISO/IEC 11801, this data cable is specified up to 600 MHz. Its construction is S/FTP, with a braided overall screen around the pairs and each pair separately foil-screened (PiMF). The duplex version carries two times four pairs. The sheath uses a halogen-free LSZH compound that produces low smoke density and no corrosive gases when burning (IEC 60754, IEC 61034). It comes in a length of 500 m. Category 7 / class F up to 600 MHz (ISO/IEC 11801)S/FTP with braided overall screen and per-pair foil screening (PiMF)Halogen-free LSZH sheath (IEC 60754, IEC 61034)Duplex construction with 2x4 pairsLength 500 m
Not in stock · delivery 4-5 days
This cable belongs to category 7 / class F according to ISO/IEC 11801 and is specified up to 600 MHz. It is a simplex design with four pairs. Screening follows the S/FTP principle: a braided overall screen encloses the pairs, each of which is additionally foil-screened (PiMF). The halogen-free LSZH sheath keeps smoke density low and releases no corrosive gases when burning (IEC 60754, IEC 61034). The length is 1000 m. Category 7 / class F up to 600 MHz (ISO/IEC 11801)S/FTP with braided overall screen and per-pair foil screening (PiMF)Halogen-free LSZH sheath (IEC 60754, IEC 61034)Simplex construction with 4 pairsLength 1000 m
Not in stock · delivery 4-5 days
The CableDoc UltraFine Patch Cord is a round patch cable of class CAT 6A EA, supplied here in black at a length of 0.10 m. Shielding is U/FTP and the specified bandwidth is 500 MHz, while the copper conductors are rated AWG 32/7 and made from 100% copper. A flame-retardant LSZH jacket keeps the cable diameter down to 3.8 mm, which leaves the cord highly flexible. The plug type is UltraFine with an indestructible latch. Data rates of 2.5 / 5 / 10 Gbps are covered, and PoE as well as PoE + are supported. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 0.10 m, colour black
Not in stock · delivery 4-5 days
Measuring 0.25 m and finished in black, this round patch cable belongs to CableDoc's UltraFine Patch Cord range. It is specified as class CAT 6A EA with U/FTP shielding and 500 MHz of bandwidth, carrying 2.5 / 5 / 10 Gbps. Inside are AWG 32/7 conductors of 100% copper under a flame-retardant LSZH jacket. At a cable diameter of 3.8 mm the cord stays easy to route. Its UltraFine plug type with an indestructible latch supports PoE and PoE +. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 0.25 m, colour black
Not in stock · delivery 4-5 days
This round cable from CableDoc's UltraFine Patch Cord range uses U/FTP shielding and is rated for class CAT 6A EA at 500 MHz bandwidth. The conductors are 100% copper in AWG 32/7, enclosed by a flame-retardant LSZH jacket. A cable diameter of 3.8 mm keeps the construction slim and flexible. The fitted plug type is UltraFine with an indestructible latch, and PoE plus PoE + are supported. This version comes in black with a length of 0.5 m and handles 2.5 / 5 / 10 Gbps. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 0.5 m, colour black
Not in stock · delivery 4-5 days
Measuring 1.5 m and finished in black, this round patch cable belongs to CableDoc's UltraFine Patch Cord range. It is specified as class CAT 6A EA with U/FTP shielding and 500 MHz of bandwidth, carrying 2.5 / 5 / 10 Gbps. Inside are AWG 32/7 conductors of 100% copper under a flame-retardant LSZH jacket. At a cable diameter of 3.8 mm the cord stays easy to route. Its UltraFine plug type with an indestructible latch supports PoE and PoE +. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 1.5 m, colour black
Not in stock · delivery 4-5 days
The CableDoc UltraFine Patch Cord is a round patch cable of class CAT 6A EA, supplied here in black at a length of 1 m. Shielding is U/FTP and the specified bandwidth is 500 MHz, while the copper conductors are rated AWG 32/7 and made from 100% copper. A flame-retardant LSZH jacket keeps the cable diameter down to 3.8 mm, which leaves the cord highly flexible. The plug type is UltraFine with an indestructible latch. Data rates of 2.5 / 5 / 10 Gbps are covered, and PoE as well as PoE + are supported. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 1 m, colour black
Not in stock · delivery 4-5 days
This round cable from CableDoc's UltraFine Patch Cord range uses U/FTP shielding and is rated for class CAT 6A EA at 500 MHz bandwidth. The conductors are 100% copper in AWG 32/7, enclosed by a flame-retardant LSZH jacket. A cable diameter of 3.8 mm keeps the construction slim and flexible. The fitted plug type is UltraFine with an indestructible latch, and PoE plus PoE + are supported. This version comes in black with a length of 2 m and handles 2.5 / 5 / 10 Gbps. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 2 m, colour black
In stock, ships immediately · delivery 1-2 days
The CableDoc UltraFine Patch Cord is a round patch cable of class CAT 6A EA, supplied here in black at a length of 3 m. Shielding is U/FTP and the specified bandwidth is 500 MHz, while the copper conductors are rated AWG 32/7 and made from 100% copper. A flame-retardant LSZH jacket keeps the cable diameter down to 3.8 mm, which leaves the cord highly flexible. The plug type is UltraFine with an indestructible latch. Data rates of 2.5 / 5 / 10 Gbps are covered, and PoE as well as PoE + are supported. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 3 m, colour black
Not in stock · delivery 4-5 days
Measuring 5 m and finished in black, this round patch cable belongs to CableDoc's UltraFine Patch Cord range. It is specified as class CAT 6A EA with U/FTP shielding and 500 MHz of bandwidth, carrying 2.5 / 5 / 10 Gbps. Inside are AWG 32/7 conductors of 100% copper under a flame-retardant LSZH jacket. At a cable diameter of 3.8 mm the cord stays easy to route. Its UltraFine plug type with an indestructible latch supports PoE and PoE +. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 5 m, colour black
Not in stock · delivery 4-5 days
This round cable from CableDoc's UltraFine Patch Cord range uses U/FTP shielding and is rated for class CAT 6A EA at 500 MHz bandwidth. The conductors are 100% copper in AWG 32/7, enclosed by a flame-retardant LSZH jacket. A cable diameter of 3.8 mm keeps the construction slim and flexible. The fitted plug type is UltraFine with an indestructible latch, and PoE plus PoE + are supported. This version comes in black with a length of 7 m and handles 2.5 / 5 / 10 Gbps. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 7 m, colour black
Not in stock · delivery 4-5 days
The CableDoc UltraFine Patch Cord is a round patch cable of class CAT 6A EA, supplied here in blue at a length of 0.10 m. Shielding is U/FTP and the specified bandwidth is 500 MHz, while the copper conductors are rated AWG 32/7 and made from 100% copper. A flame-retardant LSZH jacket keeps the cable diameter down to 3.8 mm, which leaves the cord highly flexible. The plug type is UltraFine with an indestructible latch. Data rates of 2.5 / 5 / 10 Gbps are covered, and PoE as well as PoE + are supported. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 0.10 m, colour blue
Not in stock · delivery 4-5 days
Measuring 0.25 m and finished in blue, this round patch cable belongs to CableDoc's UltraFine Patch Cord range. It is specified as class CAT 6A EA with U/FTP shielding and 500 MHz of bandwidth, carrying 2.5 / 5 / 10 Gbps. Inside are AWG 32/7 conductors of 100% copper under a flame-retardant LSZH jacket. At a cable diameter of 3.8 mm the cord stays easy to route. Its UltraFine plug type with an indestructible latch supports PoE and PoE +. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 0.25 m, colour blue
Not in stock · delivery 4-5 days
This round cable from CableDoc's UltraFine Patch Cord range uses U/FTP shielding and is rated for class CAT 6A EA at 500 MHz bandwidth. The conductors are 100% copper in AWG 32/7, enclosed by a flame-retardant LSZH jacket. A cable diameter of 3.8 mm keeps the construction slim and flexible. The fitted plug type is UltraFine with an indestructible latch, and PoE plus PoE + are supported. This version comes in blue with a length of 0.5 m and handles 2.5 / 5 / 10 Gbps. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 0.5 m, colour blue
Not in stock · delivery 4-5 days
Measuring 1.5 m and finished in blue, this round patch cable belongs to CableDoc's UltraFine Patch Cord range. It is specified as class CAT 6A EA with U/FTP shielding and 500 MHz of bandwidth, carrying 2.5 / 5 / 10 Gbps. Inside are AWG 32/7 conductors of 100% copper under a flame-retardant LSZH jacket. At a cable diameter of 3.8 mm the cord stays easy to route. Its UltraFine plug type with an indestructible latch supports PoE and PoE +. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 1.5 m, colour blue
Not in stock · delivery 4-5 days
The CableDoc UltraFine Patch Cord is a round patch cable of class CAT 6A EA, supplied here in blue at a length of 1 m. Shielding is U/FTP and the specified bandwidth is 500 MHz, while the copper conductors are rated AWG 32/7 and made from 100% copper. A flame-retardant LSZH jacket keeps the cable diameter down to 3.8 mm, which leaves the cord highly flexible. The plug type is UltraFine with an indestructible latch. Data rates of 2.5 / 5 / 10 Gbps are covered, and PoE as well as PoE + are supported. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 1 m, colour blue
Not in stock · delivery 4-5 days
This round cable from CableDoc's UltraFine Patch Cord range uses U/FTP shielding and is rated for class CAT 6A EA at 500 MHz bandwidth. The conductors are 100% copper in AWG 32/7, enclosed by a flame-retardant LSZH jacket. A cable diameter of 3.8 mm keeps the construction slim and flexible. The fitted plug type is UltraFine with an indestructible latch, and PoE plus PoE + are supported. This version comes in blue with a length of 2 m and handles 2.5 / 5 / 10 Gbps. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 2 m, colour blue
In stock, ships immediately · delivery 1-2 days
The CableDoc UltraFine Patch Cord is a round patch cable of class CAT 6A EA, supplied here in blue at a length of 3 m. Shielding is U/FTP and the specified bandwidth is 500 MHz, while the copper conductors are rated AWG 32/7 and made from 100% copper. A flame-retardant LSZH jacket keeps the cable diameter down to 3.8 mm, which leaves the cord highly flexible. The plug type is UltraFine with an indestructible latch. Data rates of 2.5 / 5 / 10 Gbps are covered, and PoE as well as PoE + are supported. CAT 6A EA class, U/FTP shielding500 MHz bandwidth, 2.5 / 5 / 10 GbpsAWG 32/7 copper conductors, 100% copperLSZH jacket, 3.8 mm cable diameterUltraFine plug type with indestructible latch, PoE and PoE +Length 3 m, colour blue
Not in stock · delivery 4-5 days