Media-Konv. DIN-Sch., erw. Temp.

The AC-SFP+MM-E-0.082 provides 10 GBit/s on two multimode fibres, using 850 nm for transmit and receive. Achievable distance follows the fibre class: 33 m with OM1, 82 m with OM2, 300 m with OM3 and 400 m with OM4. The connector is LC/PC duplex and output power lies between -7.1 dBm and -1 dBm. Optical sensitivity is -9.9 dBm at an input power of no more than -1 dBm, giving a 2.8 dB optical budget at 0 dB minimum path attenuation. Operation is intended for -40 °C to +85 °C at 4 BTU/h thermal power loss. 10 GBit/s data rateMultimode, 2 fibresOM1 33 m, OM2 82 m, OM3 300 m, OM4 400 m850 nm TX and RXLC/PC duplex connector2.8 dB optical budget

The AC-SFP+SM-E-10 addresses 10 gigabit links over singlemode, occupying two fibres and bridging up to 10 km. Transmit and receive wavelengths are both 1310 nm and the module plugs in via LC/PC duplex. Optical output power extends from -6 dBm to 0.5 dBm, sensitivity is -10.3 dBm and input power may reach 0.5 dBm. The optical budget is 4.3 dB with a minimum path attenuation of 0 dB. It is specified for -40 °C to +85 °C and weighs 0.015 kg net. 10 GBit/s data rateSinglemode, 2 fibresUp to 10 km link distance1310 nm TX and RX4.3 dB optical budgetLC/PC duplex connector

The AC-SFP+SM-E-40 serves singlemode links of up to 40 km at 10 GBit/s. It uses two fibres with an LC/PC duplex connector and works at 1310 nm in both directions. Output power ranges from 1 dBm to 7 dBm, optical sensitivity is -15 dBm and maximum input power 2 dBm. The optical budget comes to 16 dB, and a minimum path attenuation of 5 dB is assumed. The operating range spans -40 °C to +85 °C and the gross weight is 0.021 kg. 10 GBit/s data rateSinglemode, 2 fibresUp to 40 km link distance16 dB optical budget5 dB minimum path attenuation1310 nm TX and RX

The AC-SFP+-VKMM-10M is an active connection cable with two attached SFPs and a length of 10 m. Because the assembly is pre-terminated, it is put into service directly without any further cable. It transports 10 GBit/s over two multimode fibres, and the maximum distance matches the cable length of 10 m. Operating temperature runs from 0 °C to +50 °C with a thermal power loss of 4 BTU/h. Gross weight is 0.273 kg and net weight 0.139 kg. Active connection cable with 2 SFPs10 m length10 GBit/s data rateMultimode, 2 fibresPre-terminated assembly0 °C to +50 °C operating range

The AC-SFP+-VKMM-1M combines two SFPs with a 1 m cable into an active connection assembly. As the unit ships pre-terminated, no separate cable is needed. Two multimode fibres carry 10 GBit/s, and the transmission distance is accordingly 1 m. Operation is permitted from 0 °C to +50 °C at 4 BTU/h thermal power loss. The stated weights are 0.198 kg gross and 0.061 kg net. Active connection cable with 2 SFPs1 m length10 GBit/s data rateMultimode, 2 fibresPre-terminated assembly0.061 kg net weight

At 5 m the AC-SFP+-VKMM-5M active connection cable sits between the shorter and longer versions of the range. An SFP is fitted at each end, so the assembly is ready for use without any additional cable. It transfers 10 GBit/s over two multimode fibres across a distance of 5 m. The operating temperature range is 0 °C to +50 °C at 4 BTU/h thermal power loss. Gross weight amounts to 0.226 kg, net weight to 0.091 kg. Active connection cable with 2 SFPs5 m length10 GBit/s data rateMultimode, 2 fibresPre-terminated assembly0 °C to +50 °C operating range

The AC-SFP-BIA-LXE provides 1 GBit/s on one singlemode fibre. Connected through LC/PC simplex, it bridges distances of up to 20 km, transmitting at 1310 nm and receiving at 1550 nm. Output level covers -9 dBm to -3 dBm, sensitivity is -21 dBm and input power must stay at or below -3 dBm. The specified optical budget is 12 dB with a minimum path attenuation of 0 dB. Operating temperature spans -40 °C to +85 °C at 4 BTU/h thermal power loss. 1 GBit/s data rateSinglemode, 1 fibreUp to 20 km link distanceLC/PC simplex connector12 dB optical budget-40 °C to +85 °C operating range

The AC-SFP-BIA-SXE is a gigabit SFP for short multimode runs of no more than 550 m. It works on a single fibre with an LC/PC simplex connector, sending at 1310 nm and receiving at 1550 nm. Optical output power lies between -8 dBm and 0 dBm, sensitivity is -18 dBm and maximum input power 0 dBm. The optical budget covers 10 dB with 0 dB minimum path attenuation. The module is approved from -40 °C to +85 °C and dissipates 4 BTU/h. 1 GBit/s data rateMultimode, 1 fibreUp to 550 m link distanceTX 1310 nm / RX 1550 nm10 dB optical budget4 BTU/h thermal power loss

The AC-SFP-BIB-LXE delivers 1 GBit/s on a single singlemode fibre over distances of up to 20 km. It sends at 1550 nm, receives at 1310 nm and plugs in through LC/PC simplex. Optical output power stays within -9 dBm to -3 dBm, sensitivity is -21 dBm and permissible input power reaches -3 dBm at most. A 12 dB optical budget and a minimum path attenuation of 0 dB are specified. The module runs from -40 °C to +85 °C and gives off 4 BTU/h. 1 GBit/s data rateSinglemode, 1 fibreTX 1550 nm / RX 1310 nmUp to 20 km link distance12 dB optical budgetLC/PC simplex connector

The AC-SFP-BIB-SXE targets multimode connections of up to 550 m and transports 1 GBit/s over one fibre. Its transmit path runs at 1550 nm and its receive path at 1310 nm, using an LC/PC simplex connector. Output power extends from -8 dBm to 0 dBm, optical sensitivity is -18 dBm and maximum input power 0 dBm. The optical budget is 10 dB at a minimum path attenuation of 0 dB. Operation is intended for -40 °C to +85 °C with 4 BTU/h thermal power loss. 1 GBit/s data rateMultimode, 1 fibreUp to 550 m link distanceTX 1550 nm / RX 1310 nm10 dB optical budget4 BTU/h thermal power loss

The AC-SFP-LX-E-10 moves 1 GBit/s across two singlemode fibres and reaches up to 10 km. Both directions work at 1310 nm and the connection is made through LC/PC duplex. Optical output power ranges from -9 dBm to -3 dBm, sensitivity is -21 dBm and maximum input power -3 dBm. The link is rated with a 12 dB optical budget and 0 dB minimum path attenuation. The module is specified from -40 °C to +85 °C and dissipates 4 BTU/h. 1 GBit/s data rateSinglemode, 2 fibresUp to 10 km link distance1310 nm TX and RX12 dB optical budgetLC/PC duplex connector

The AC-SFP-LX-E-20 builds gigabit links over two singlemode fibres for distances of up to 20 km. Both directions run at 1310 nm and the connector is LC/PC duplex. Output level covers -8 dBm to -2 dBm, optical sensitivity is -23 dBm and input power may not exceed -1 dBm. The optical budget stands at 15 dB with a minimum path attenuation of 0 dB. Its operating range spans -40 °C to +85 °C and the net weight is 0.018 kg. 1 GBit/s data rateSinglemode, 2 fibresUp to 20 km link distance15 dB optical budget-23 dBm optical sensitivityLC/PC duplex connector

Designed for long singlemode runs of up to 40 km, the AC-SFP-LX-E-40 carries 1 GBit/s over two fibres. Transmit and receive wavelengths are both 1310 nm and the module uses an LC/PC duplex connector. Output power lies between -4 dBm and 3 dBm, sensitivity is -24 dBm and maximum input power -1 dBm. Its optical budget is 20 dB, and a minimum path attenuation of 4 dB is required. Operation runs from -40 °C to +85 °C at 4 BTU/h thermal power loss. 1 GBit/s data rateSinglemode, 2 fibresUp to 40 km link distance20 dB optical budget4 dB minimum path attenuation1310 nm TX and RX

Spanning as much as 70 km on two singlemode fibres, the AC-SFP-LX-E-70 works at 1550 nm in both directions. The data rate is 1 GBit/s and the connection is LC/PC duplex. Optical output power extends from 0 dBm to 5 dBm, sensitivity is -30 dBm and input power must not exceed -9 dBm. With a 30 dB optical budget and a required minimum path attenuation of 14 dB, the module is tuned to long links. The temperature range covers -40 °C to +85 °C. 1 GBit/s data rateSinglemode, 2 fibresUp to 70 km link distance1550 nm TX and RX30 dB optical budget14 dB minimum path attenuation

The AC-SFP-SX-E is a gigabit module for two multimode fibres with a reach of up to 550 m. It operates at 850 nm in both directions and connects via LC/PC duplex. Output power lies between -9.5 dBm and -4 dBm, optical sensitivity is -18 dBm and maximum input power 0 dBm. The optical budget comes to 8.5 dB at 0 dB minimum path attenuation. Operation is foreseen from -40 °C to +85 °C with 4 BTU/h thermal power loss. 1 GBit/s data rateMultimode, 2 fibresUp to 550 m link distance850 nm TX and RX8.5 dB optical budgetLC/PC duplex connector

On two multimode fibres the AC-SFP-SXOM3-E achieves 1 GBit/s over a distance of up to 2 km. Transmit and receive wavelengths are 1310 nm and the module uses an LC/PC duplex connector. Output level moves between -23.5 dBm and -14 dBm, sensitivity is -31 dBm and maximum input power -8 dBm. A 7.5 dB optical budget and 0 dB minimum path attenuation are specified. The module is rated from -40 °C to +85 °C and has a gross weight of 0.023 kg. 1 GBit/s data rateMultimode, 2 fibresUp to 2 km link distance1310 nm TX and RX7.5 dB optical budgetLC/PC duplex connector