SFPs m. erw. Temp.
Price after sign-in
Prices and conditions are shown once you sign in with your customer account.
Sign inNot in stock · delivery 1-2 days
Fits
The PC-BTPMC101-10GE is a media converter without management that links a 1G/10G TX copper port with RJ45 to an SFP/SFP+ port for 1G/10G BaseFX. The copper port supplies power to IEEE 802.3af, at and bt with up to 90 W. On the copper side the reach is a maximum of 100 m at 1G with Cat5 or better and 50 m at 10G with Cat6a or better, while on the optical side distance depends on the SFP, as does LC duplex or simplex operation. Power can be fed redundantly and is 12-56 VDC without PoE, 48-56 VDC with PoE and 52-56 VDC for PoE++ from 30 W, with the unit itself drawing a maximum of 4 W without PoE. It meets protection class IP30, supports link fault pass through and carries FCC Class A and CE marking. MTBF is 1'284'700 h at 20 C and 188'900 h at 75 C; the housing measures 104 x 32 x 82 mm without connectors and works from -40 C to +75 C. DIN rail or wall mounting1 x 1G/10G TX with PoE 802.3af/at/bt up to 90 W1 x 1G/10G SFP/SFP+Link fault pass throughPower supply 48-56 VDC, redundantIP30 protection, -40 C to +75 C
Not in stock · delivery 1-2 days
For video networks with heavy data loads, this industrial Layer 2/3 switch provides eight copper ports 10/100/1000TX on RJ45, with ports 1 to 4 carrying PoE+ and ports 5 to 8 PoE++, within a maximum of 360W across all ports. Two SFP/SFP+ slots for 1G/10G form the backbone connection, the backplane delivers 56GBit/s and the MAC table holds 16k entries. Besides static routing, the device handles the dynamic protocols OSPFv2/v3 and RIPv1/v2 for IPv4 and IPv6, and it also supports S-VLAN as well as PTP to IEEE1588 v2 and IEC 61588. Non Stop PoE keeps connected PDs supplied during a reboot, and jumbo frames up to 10240 bytes are supported at 100MBit/s too. The fanless DIN rail housing measures 170x70x130mm, operates from -40°C to +75°C and runs on 48-56VDC; individual management interfaces can be switched off. DIN rail mounting, fanless, 170x70x130mm8 x 10/100/1000TX, 4 x PoE+ and 4 x PoE++, max. 360W2 x SFP/SFP+ 1G/10G, 56GBit/s backplaneOSPFv2/v3 and RIPv1/v2, 16k MAC tableNon Stop PoE, IEEE 1588 v2 PTP48-56VDC supply, -40°C to +75°C
Not in stock · delivery 1-2 days
Product data
- Manufacturer
- Barox
- Article number
- AC-SFP+-VKMM-10M
- Weight
- 0.3 kg
- Dimensions (W×H×D)
- 14 × 10 × 55 mm
Description
The AC-SFP+-VKMM-10M is an active connection cable with two attached SFPs and a length of 10 m. Because the assembly is pre-terminated, it is put into service directly without any further cable. It transports 10 GBit/s over two multimode fibres, and the maximum distance matches the cable length of 10 m. Operating temperature runs from 0 °C to +50 °C with a thermal power loss of 4 BTU/h. Gross weight is 0.273 kg and net weight 0.139 kg.
- Active connection cable with 2 SFPs
- 10 m length
- 10 GBit/s data rate
- Multimode, 2 fibres
- Pre-terminated assembly
- 0 °C to +50 °C operating range
Made by
Barox from Switzerland builds network technology for video security: managed and unmanaged PoE switches for desktop, 19" rack, DIN rail and outdoor cabinets with an extended temperature range, fibre media converters, PoE injectors and midspans, coax and Ethernet extenders for moving analogue installations to IP, plus industrial and redundant power supplies. AI4Vision is an authorised distributor; every device comes with technical data and its data sheet, trade prices after login.
Notes
For technical specifications and product characteristics, only the details in the manufacturer's current product datasheet are authoritative. Illustrations may differ from the scope of delivery.
Specifications
- Centre wavelength RX
- -
- Centre wavelength TX
- -
- Connector
- -
- Data rate
- 10GBit/s
- Distance attenuation (min)
- -
- Fibre count
- 2
- Fibre type / conductor type
- Multimode
- Life cycle
- Normal
- Max. optical input power
- -
- Max. optical transmission power
- -
- Min. optical transmission power
- -
- Operating temperature
- 0°C ... +50°C
- Optical budget
- -
- Optical sensitivity
- -
- SFP Faserart
- Multimode
- SFP data rate
- 10 GBit/s
- SFP fiber count
- 2
- Thermal power loss
- 4 BTU/h
- Transmission distance (max)
- 10m
- Weight
- Gross weight: 0.273 kg, Net weight: 0.139 kg