SFPs m. erw. Temp.
Price after sign-in
Prices and conditions are shown once you sign in with your customer account.
Sign inNot in stock · delivery 1-2 days
Fits
The PC-BTPMC101-10GE is a media converter without management that links a 1G/10G TX copper port with RJ45 to an SFP/SFP+ port for 1G/10G BaseFX. The copper port supplies power to IEEE 802.3af, at and bt with up to 90 W. On the copper side the reach is a maximum of 100 m at 1G with Cat5 or better and 50 m at 10G with Cat6a or better, while on the optical side distance depends on the SFP, as does LC duplex or simplex operation. Power can be fed redundantly and is 12-56 VDC without PoE, 48-56 VDC with PoE and 52-56 VDC for PoE++ from 30 W, with the unit itself drawing a maximum of 4 W without PoE. It meets protection class IP30, supports link fault pass through and carries FCC Class A and CE marking. MTBF is 1'284'700 h at 20 C and 188'900 h at 75 C; the housing measures 104 x 32 x 82 mm without connectors and works from -40 C to +75 C. DIN rail or wall mounting1 x 1G/10G TX with PoE 802.3af/at/bt up to 90 W1 x 1G/10G SFP/SFP+Link fault pass throughPower supply 48-56 VDC, redundantIP30 protection, -40 C to +75 C
Not in stock · delivery 1-2 days
Operating on layer 2 and layer 3, this 19″ switch was developed for applications with high data loads such as video over IP and video streaming including multicast, and extensive security features protect the switch itself as well as the network traffic. It carries 24 copper ports of 10/100/1000TX with RJ45 and PoE+ to 802.3af (15W) and 802.3at (30W) with a maximum of 370W across all ports, plus four SFP/SFP+ ports at 1G/10G and an RS232 console port with RJ45. Cameras powered over PoE are monitored continuously and restarted after a failure, and Non Stop PoE is available. Beyond static routing it supports OSPFv2/v3 and RIPv1/v2; administration runs through web GUI, DMS, SNMPv1, v2c and v3, console, Telnet and RMON, with individual management access methods able to be disabled. The backplane delivers 128GBit/s with a 32k MAC table, and a supply of 100-240VAC at 50-60Hz results in 40W maximum without PoE and 410W with PoE; the unit has a regulated fan, works from 0°C to 50°C and weighs 3.3 kg net. 19″ switch, layer 2 and layer 3, ring-capable24 x 10/100/1000TX with PoE+, max. 370W for all ports4 x SFP/SFP+ at 1G/10GStatic and dynamic routing, OSPFv2/v3 and RIPv1/v2Non Stop PoE, regulated fanBackplane 128GBit/s, MAC table 32k
Not in stock · delivery 1-2 days
For video networks with heavy data loads, this industrial Layer 2/3 switch provides eight copper ports 10/100/1000TX on RJ45, with ports 1 to 4 carrying PoE+ and ports 5 to 8 PoE++, within a maximum of 360W across all ports. Two SFP/SFP+ slots for 1G/10G form the backbone connection, the backplane delivers 56GBit/s and the MAC table holds 16k entries. Besides static routing, the device handles the dynamic protocols OSPFv2/v3 and RIPv1/v2 for IPv4 and IPv6, and it also supports S-VLAN as well as PTP to IEEE1588 v2 and IEC 61588. Non Stop PoE keeps connected PDs supplied during a reboot, and jumbo frames up to 10240 bytes are supported at 100MBit/s too. The fanless DIN rail housing measures 170x70x130mm, operates from -40°C to +75°C and runs on 48-56VDC; individual management interfaces can be switched off. DIN rail mounting, fanless, 170x70x130mm8 x 10/100/1000TX, 4 x PoE+ and 4 x PoE++, max. 360W2 x SFP/SFP+ 1G/10G, 56GBit/s backplaneOSPFv2/v3 and RIPv1/v2, 16k MAC tableNon Stop PoE, IEEE 1588 v2 PTP48-56VDC supply, -40°C to +75°C
Not in stock · delivery 1-2 days
Product data
- Manufacturer
- Barox
- Article number
- AC-SFP+SM-E-40
- Weight
- 0.03 kg
- Dimensions (W×H×D)
- 14 × 10 × 55 mm
Description
The AC-SFP+SM-E-40 serves singlemode links of up to 40 km at 10 GBit/s. It uses two fibres with an LC/PC duplex connector and works at 1310 nm in both directions. Output power ranges from 1 dBm to 7 dBm, optical sensitivity is -15 dBm and maximum input power 2 dBm. The optical budget comes to 16 dB, and a minimum path attenuation of 5 dB is assumed. The operating range spans -40 °C to +85 °C and the gross weight is 0.021 kg.
- 10 GBit/s data rate
- Singlemode, 2 fibres
- Up to 40 km link distance
- 16 dB optical budget
- 5 dB minimum path attenuation
- 1310 nm TX and RX
Made by
Barox from Switzerland builds network technology for video security: managed and unmanaged PoE switches for desktop, 19" rack, DIN rail and outdoor cabinets with an extended temperature range, fibre media converters, PoE injectors and midspans, coax and Ethernet extenders for moving analogue installations to IP, plus industrial and redundant power supplies. AI4Vision is an authorised distributor; every device comes with technical data and its data sheet, trade prices after login.
Notes
For technical specifications and product characteristics, only the details in the manufacturer's current product datasheet are authoritative. Illustrations may differ from the scope of delivery.
Specifications
- Centre wavelength RX
- 1310nm
- Centre wavelength TX
- 1310nm
- Connector
- LC/PC-Duplex
- Data rate
- 10GBit/s
- Distance attenuation (min)
- 5dB
- Fibre count
- 2
- Fibre type / conductor type
- Singlemode
- Life cycle
- Normal
- Max. optical input power
- 2dBm
- Max. optical transmission power
- 7dBm
- Min. optical transmission power
- 1dBm
- Operating temperature
- -40°C ... +85°C
- Optical budget
- 16dB
- Optical sensitivity
- -15dBm
- SFP Faserart
- Singlemode
- SFP data rate
- 10 GBit/s
- SFP fiber count
- 2
- Transmission distance (max)
- 40km
- Weight
- Gross weight: 0.021 kg, Net weight: 0.015 kg