DTS-01, Tabletop Stand

The HMQ-4301 is a 43-inch monitoring display with an IPS panel and 3840 x 2160 pixels that shows image quality of up to 8MP over an HDMI connection. Its SDI loop-through passes uncompressed 1080p footage from HD-SDI or 3G-SDI cameras on to further SDI devices at ultra-low latency, covering SD-SDI at 480i @60fps and 576i @50fps, HD-SDI at 720p and 1080p, and 3G-SDI at 1080p @50/60fps. Over RG6 coaxial cable the reach is 100M for 3G-SDI, 150M for HD-SDI and 300M for SD-SDI. Inputs comprise Audio, Composite (BNC), DVI-D, HDMI, RJ45, RS232, SDI (BNC), USB Type-A and VGA, with Audio, Composite (BNC) and SDI (BNC) as outputs. A pre-configured CCTV Mode, enhanced gamma selection and black-level adjustment sharpen low-light footage, while the metal casing improves heat dissipation and Anti-burn-in Technology protects 24/7 operation. Brightness is 350~499 cd/㎡ and speakers are rated 5 W x 2. 43-inch, 3840 x 2160, IPS panelSDI loop-through with SD, HD and 3G-SDIUp to 8MP image quality via HDMIInputs incl. DVI-D, HDMI, SDI (BNC), VGA, RS232, RJ45CCTV Mode, gamma selection, black-level adjustmentMetal casing and Anti-burn-in Technology

The HMQ-5501 is a 55-inch surveillance display with UHD 3840 x 2160 (16:9) resolution and 178/178 viewing angles that presents up to 8MP image quality over HDMI. Its SDI loop-through forwards uncompressed 1080p footage from HD-SDI and 3G-SDI cameras to further SDI devices at ultra-low latency, reaching 100M for 3G-SDI, 150M for HD-SDI and 300M for SD-SDI over RG6 coaxial cable. Connections comprise Audio, Composite (BNC), DVI-D, HDMI, RJ45, RS232, SDI (BNC), USB Type-A and VGA inputs plus Audio, Composite (BNC) and SDI (BNC) outputs, with external control over RJ45 or RS232. CCTV Mode, gamma selection and black-level adjustment improve images captured in poor light. Anti-Burn-in Technology, metal casing and HeatControl address 24/7 operation, brightness is 350~499 cd/㎡, speakers are 5 W x 2 and the VESA pattern is 400 x 400 mm. 55-inch, UHD 3840 x 2160 (16:9)SDI loop-through, 3G-SDI 1080p178/178 viewing angles, 350~499 cd/㎡External control via RJ45 and RS23224-7 operation, HeatControl, Anti-Burn-inVESA FPMPMI 400 x 400 mm

The NSD-3203 is an all-in-one digital signage display with a 31.5 inch panel and FHD output. Playback runs on a built-in Android 9.0 system with an A35*4 CPU, 2G of memory and 16G of storage, controlled either through the built-in OS or a mobile app. Brightness is 500 cd/m² with a 4000:1 contrast ratio and 0.364 mm pixel pitch, and the panel is released for 24/7 use in landscape or portrait orientation. Three HDMI 2.0 inputs and two USB 2.0 ports (service port / media playback) handle sources and media. Frequency ranges are 18kHz-68kHz horizontal and 24Hz-60Hz vertical, with 40W drawn in on mode and up to 70W maximum. The display is IP5X rated, weighs 5.4 kg without base, uses a 150mm*200mm VESA pattern and carries FCC, CE, LVD, ICES-003 Issue 7, WEEE, RoHS and REACH approvals. Android 9.0, A35*4 CPU, 2G / 16G31.5 inch panel, 500 cd/m²4000:1 contrast ratio3x HDMI 2.0, 2x USB 2.024/7 operation, landscape or portraitIP5X rating, VESA 150mm*200mm

The NSD-4303 is an all-in-one digital signage display with a 42.5 inch panel and 4K UHD output. Content plays back on a built-in Android 9.0 system with an A35*4 CPU, 2G of memory and 16G of storage, and external control runs via the built-in OS, a mobile app, RJ45 or RS232. Brightness is 500 cd/m², contrast is 4000:1, the bezel is an even 8.7 mm and the panel is released for 24/7 operation. Sources and media playback are covered by three HDMI 2.0 inputs and two USB 2.0 ports (service port / media playback). Frequency ranges run 18kHz-135kHz horizontally and 24Hz-60Hz vertically, with 73W in on mode and up to 120W maximum. The unit is IP5X rated, weighs 9.1 kg without base and holds FCC, CE, LVD, ICES-003 Issue 7, WEEE, RoHS, REACH and BSMI approvals. Android 9.0, A35*4 CPU, 2G / 16G42.5 inch panel, 4K UHD500 cd/m², 4000:1 contrast3x HDMI 2.0, 2x USB 2.0RJ45 and RS232 external control24/7 operation, VESA 400mm*300mm

The NSD-5503 is an all-in-one digital signage display with a 54.6 inch panel and 4K UHD output. Playback is handled by a built-in Android 9.0 system with an A35*4 CPU, 2G of memory and 16G of storage, controlled through the built-in OS, a mobile app, RJ45 or RS232. Brightness is quoted at 500 cd/m² and contrast at 4000:1, while three HDMI 2.0 inputs and two USB 2.0 ports (service port / media playback) serve sources and media. Frequency coverage is 18kHz-135kHz horizontal and 24Hz-60Hz vertical, with 89W drawn in on mode and up to 140W maximum. The VESA pattern measures 300mm*400mm and the matching wall mounts are LMA-01, LMA-02 and WMK-04. The display is IP5X rated and weighs 17.6 kg without base; an HDMI cable, power cord, quick start guide, remote control and wall mount are supplied. Android 9.0, A35*4 CPU, 2G / 16G54.6 inch panel, 4K UHD500 cd/m², 4000:1 contrast3x HDMI 2.0, 2x USB 2.0VESA 300mm*400mm, IP5X ratingWall mounts LMA-01, LMA-02, WMK-04

The PD-4302 is a commercial display with a 43.0 inch IPS panel at UHD 3840 x 2160 and a 20,000,000:1 (DCR) contrast ratio. An SDM-S slot is provided for expansion, while sources connect through VGA (15-pin D-Sub x 1), a 3.5 mm IR input and a USB 2.0 service port. Audio is handled by two 10W speakers and a 3.5 mm stereo audio output. Frequency ranges are 15 kHz-136 kHz horizontal and 23 Hz-76 Hz vertical, and the operating temperature range is -10°C-60°C. The VESA pattern is 200 x 200 mm, with LMA-01, LMK-02, WMA-01 and WMK-03 among the listed wall mounts and CMP-01 + LMK-02 for ceilings. Certification covers CE, LVD, WEEE, RoHS and REACH, and an HDMI cable, power cord, quick start guide, remote control and RS232 cable are supplied. 43.0 inch IPS panel, UHD 3840 x 216020,000,000:1 (DCR) contrastSDM-S expansion slot10W x 2 internal speakers-10°C-60°C operating temperatureVESA 200 x 200 mm

The PD-5502 is a commercial display with a 54.6 inch IPS panel at UHD 3840 x 2160 and 20,000,000:1 (DCR) contrast. Its SDM slot accepts SDM-L and SDM-S modules, and further interfaces include VGA (15-pin D-Sub x 1) and a 3.5 mm IR input. Audio runs through a 3.5 mm stereo input and output plus two 10W internal speakers. Frequency ranges span 15 kHz-136 kHz horizontally and 23 Hz-76 Hz vertically. The power supply is internal and rated AC 100-240V, 50/60 Hz, with standby draw below 0.5W, and the operating temperature range is -10°C to 60°C. LMA-01 and LMA-02 are the listed wall mounts, CMP-01 + LMK-01 covers ceiling installation, and certification includes CE, LVD, WEEE, RoHS and REACH. 54.6 inch IPS panel, UHD 3840 x 216020,000,000:1 (DCR) contrastSDM slot (SDM-L, SDM-S)10W x 2 internal speakersInternal PSU, AC 100-240V, 50/60 Hz-10°C-60°C operating temperature

The PN-46D3 is an ultra-narrow bezel video wall display intended for commercial and professional large-scale LCD installations. Its 46.0 inch IPS panel runs at 500 cd/m² with a 0.530mm pixel pitch and a 5ms response time, and bezel width is 2.45 mm at the top and left and 1.35 mm at the bottom and right. A built-in scheduler, the UniWall™ feature and DisplayPort daisy-chaining allow walls of up to 15×15 displays without third-party devices. Connectivity covers DisplayPort 1.2 with two inputs and one output, a 3.5 mm IR input, LAN over RJ45 and RS232 over RJ45, and Neovo Controller is available for management. Horizontal frequency runs from 30 kHz to 160 kHz, with 103W drawn in on mode and up to 149W maximum. The display weighs 19.0 kg without base and is approved to CE, LVD, REACH, RoHS, UKCA and WEEE. 46.0 inch IPS panel, 500 cd/m²2.45 mm / 1.35 mm bezel widthUniWall™ for walls up to 15×15DisplayPort 1.2 with daisy chainLAN, RS232 and IR controlNeovo Controller

The PN-55D3 is a 55-inch ultra-narrow bezel video wall display for large professional installations, from public venues through to control rooms in 24/7 operation. Its IPS panel delivers 500~700 cd/㎡, carries an anti-glare treatment with 28% haze and joins into near-seamless walls thanks to a 3.5 mm bezel-to-bezel transition. A built-in scheduler and the UniWall™ feature support walls of up to 15x15 displays without external splitters, while DisplayPort 1.2 Multistream enables a 2x2 4K wall. Patented Anti-Burn-in™ Technology guards against burn-in, and multiple Gamma settings produce more consistent colour tones. Control runs over daisy chain, IR input and output and RS232 on a 2.5 mm jack, with Neovo Controller handling remote management. An OPS slot accepts standardised modules, two 10W speakers are fitted, a HeatControl sensor manages fan and heat control, and the display works in landscape or portrait. 55-inch IPS panel, 500~700 cd/㎡3.5 mm bezel-to-bezel transitionUniWall™ for walls up to 15x15DisplayPort 1.2 MultistreamPatented Anti-Burn-in™ TechnologyOPS slot, landscape and portrait

The QM4303 is a digital signage display with a 42.5 inch panel and UHD 3840 x 2160 (16:9) resolution. Brightness is 500~700 cd/㎡ and viewing angles are 178/178, with the panel released for 24/7 operation in landscape or portrait. Inputs comprise HDMI, USB Type-B and USB Type-C, external control uses RJ45 and RS232 on a 3.5 mm jack, and audio runs through a 3.5 mm stereo output and two 10W speakers. An anti-burn-in function is included, the casing is black with a black and white option, and the rear cover is plastic. Without base the display measures 971.0 x 559.5 x 70.0 mm. Batteries, an HDMI cable, power adaptor, quick start guide and remote control are supplied. 42.5 inch panel, UHD 3840 x 2160 (16:9)500~700 cd/㎡, 178/178 viewing angles24/7 operation, landscape or portraitHDMI, USB Type-B and USB Type-CRJ45 and RS232 external control10W x 2 speakers, anti-burn-in

Built around a 32.0-inch panel with a 0.182 mm pixel pitch, this display accepts up to four HDMI 2.0 sources plus one DisplayPort 1.2 signal. Outputs comprise DisplayPort and RS232, alongside an IR out on a 3.5 mm phone jack and RS232 in and out on 2.5 mm jacks. External control is available over daisy chain, RJ45 or RS232 and can be extended with the KPD01 keypad, the KNB01 control knob and Neovo Controller software. The metal casing meets IK10, the even bezel is 12.8 mm wide and the VESA pattern is 200 x 200 mm. Dimensions without base are 756.5 x 451.4 x 79.3 mm; power is DC 24V, 5.5A at 48 W in on mode and 86 W maximum, with 5% to 95% non-condensing humidity permitted. 32.0-inch panel, 0.182 mm pixel pitch4 x HDMI 2.0 and 1 x DisplayPort 1.2IK10 metal casingVESA 200 x 200 mm48 W (On), 86 W maximumDaisy chain, RJ45 and RS232 control

An IPS panel drives this display at a maximum resolution of UHD 3840 x 2160, with a 0.245 mm pixel pitch and 178-degree viewing angles both horizontally and vertically. Brightness is 450 cd/m², colour depth 1.07G, colour gamut NTSC 72% and response time 5 ms. The surface receives anti-glare treatment at haze 25% plus a 3H hard coating, and the unit handles 15 kHz to 136 kHz horizontally and 23 Hz to 76 Hz vertically. Connectivity covers four HDMI 2.0 ports and one DisplayPort 1.2, IR in and out on 3.5 mm jacks, RS232 in and out on 2.5 mm jacks, an RJ45 port and a USB 2.0 service port. Audio is delivered by two 12 W speakers or the 3.5 mm stereo jack output. IPS panel with UHD 3840 x 2160450 cd/m² brightness, 5 ms response time0.245 mm pixel pitch4 x HDMI 2.0 and 1 x DisplayPort 1.2Anti-glare haze 25% with 3H hard coating12 W x 2 internal speakers

Compatible with analogue and digital surveillance systems alike, this durable 43-inch 4K surveillance display is made for nonstop professional duty in control rooms. It supports camera image quality up to 8MP and keeps recorded footage crisp when operators zoom in for detail. Equipment includes anti-burn-in technology, a metal casing, HeatControl and gamma selection, with brightness of 350~499 cd/㎡ and 178/178 viewing angles. Inputs are audio, composite (BNC), DVI-D, HDMI, RS232, USB Type-A and VGA, outputs are audio and composite (BNC), and control runs over RJ45 or RS232 on a 9-pin D-Sub. Two 5 W speakers, an S/PDIF output and a 400 x 200 mm VESA pattern round out the unit, which measures 969.9 x 558.3 x 84.6 mm without base. Anti-burn-in technology and metal casing350~499 cd/㎡ brightness, 178/178 viewing anglesHeatControl for 24/7 dutyComposite (BNC), DVI-D, HDMI, VGA and USB Type-A inputsRJ45 and RS232 (9-pin D-Sub) controlVESA 400 x 200 mm

This durable 55-inch 4K surveillance display works with analogue and digital surveillance systems and is intended for continuous control-room duty. Camera image quality up to 8MP is supported, so recorded footage stays detailed when operators zoom in. Anti-burn-in technology, a metal casing, HeatControl and gamma selection are included, with 350~499 cd/㎡ brightness and 178/178 viewing angles. Sources connect over audio, composite (BNC), DVI-D, HDMI, RS232, USB Type-A and VGA, while audio, composite (BNC) and S/PDIF handle output and external control runs over IR or RS232 on a 9-pin D-Sub. Two 5 W speakers, a 400 x 400 mm VESA pattern and an operating range of 0 to 40 degrees Celsius complete the specification. Anti-burn-in technology and metal casing350~499 cd/㎡ brightness, 178/178 viewing anglesHeatControl for 24/7 dutyComposite (BNC), DVI-D, HDMI, VGA and USB Type-A inputsIR and RS232 (9-pin D-Sub) controlVESA 400 x 400 mm

This 32-inch commercial-grade LCD display for video surveillance uses a 31.5-inch IPS panel in 16:9 and reaches 450 cd/m². It is rated for 24/7 operation, installs in landscape or portrait and comes with anti-burn-in plus NeoV Optical Glass. The black chassis with metal rear cover is IK10 rated across the entire unit and carries front-sided IP22 protection. Video comes in on one composite BNC input and loops out through one composite BNC output, joined by a 3.5 mm stereo audio input, an audio output on S/PDIF and 3.5 mm jack, and an RJ45 port. Two 10 W speakers are built in; the display measures 758.4 x 454.2 x 84.5 mm without base and ships with an HDMI cable, power cord, quick start guide and remote control. 31.5-inch IPS panel, 450 cd/m² brightnessIK10 for the entire unit, front-sided IP22NeoV Optical Glass and anti-burn-inMetal rear cover, black casingComposite (BNC) input and output, RJ4510 W x 2 speakers and S/PDIF output

This 43-inch commercial-grade display for video surveillance resolves UHD 3840 x 2160 in 16:9 and reaches 450 cd/m² on its IPS panel with 178/178 viewing angles. The metal casing is IK10 rated and protected to front-sided IP22, and anti-burn-in technology is part of the package. Image tuning offers black-level adjustment and gamma selection, and the unit covers 31 kHz to 92 kHz and 48 Hz to 76 Hz. Video enters on one composite BNC input and loops out on one composite BNC output, while external control runs over RJ45 or RS232 on a 9-pin D-Sub. Two 12 W speakers and an S/PDIF output are fitted, and without base the display measures 1002.0 x 591.6 x 84.7 mm at 19.0 kg. UHD 3840 x 2160 (16:9) on an IPS panel450 cd/m² brightness, 178/178 viewing anglesIK10 metal casing, front-sided IP22Anti-burn-in technologyRJ45 and RS232 (9-pin D-Sub) control12 W x 2 speakers and S/PDIF output

Using an IPS panel, this 55-inch 4K commercial-grade display for video surveillance reaches 400 cd/m² and responds in 5 ms. Its metal casing is IK10 rated with front-sided IP22 protection, and continuous round-the-clock operation is supported. One composite BNC input takes video in and one composite BNC output loops it onward, joined by a 3.5 mm stereo audio input, an audio output and a USB 2.0 port serving as service and media playback connection. External control runs over RJ45 or RS232 on a 9-pin D-Sub, and two 12 W speakers are built in. Maximum consumption is 124 W, the unit handles 48 Hz to 76 Hz, mounts with LMA-01, LMA-02 or WMK-05 wall brackets and complies with CE, LVD, WEEE, RoHS, REACH and BSMI. IPS panel at 400 cd/m² with 5 ms responseIK10 metal casing, front-sided IP22Composite (BNC) input and outputRJ45 and RS232 (9-pin D-Sub) control12 W x 2 internal speakers124 W maximum power consumption

The TX-3203 is a 32-inch touch display in a metal casing, running Full HD at 1920 x 1080 pixels in 16:9 and registering up to 30 projected capacitive touch points, including through a cover glass and while wearing gloves. Panel figures are 500 cd/m² brightness, a 4000:1 contrast ratio, 5 ms response time, 178/178 degree viewing angles and 0.364 mm pixel pitch. DisplayPort, HDMI and VGA take the video signal, external control runs over RJ45 and a LAN port is provided. Consumption amounts to 26 W in operation and below 1.0 W in standby, with a permitted range of 0 °C to 40 °C at 20 to 80 percent non-condensing humidity. The VESA pattern measures 200 x 200 mm, supported by the DTS-01 desk mount and the WMK-03 wall mount. Compliance covers CE, LVD, WEEE, RoHS, REACH and BSMI. 30-point PCAP touch, through-glass capableFull HD 1920 x 1080, 500 cd/m², 4000:1 contrastMetal casing, VESA 200 x 200 mmDisplayPort, HDMI, VGA, LAN, RJ45 control26 W on mode, under 1.0 W standbyCE, LVD, WEEE, RoHS, REACH, BSMI

The VA-4301 is a 43-inch 4K UHD display with a slim bezel, intended for digital signage in landscape orientation. Its IPS panel measures 42.5 inches, delivers 350 cd/m² and carries an anti-glare treatment with 1 percent haze plus a 3H hard coating. Internal operating time is stated as 18/7 and the aspect ratio is 16:9. Three HDMI 2.0 inputs accept sources and two 5 W speakers are integrated. Horizontal frequency runs from 31 to 136 kHz and vertical frequency from 29 to 61 Hz, while power draw is 54 W in operation and under 0.5 W in standby. The casing is finished in black with a plastic rear cover, is offered in black and white, and measures 958.4 x 568.5 x 76.7 mm without the base at a packed weight of 9.9 kg. 43-inch 4K UHD with slim bezel42.5-inch IPS panel, 350 cd/m²Anti-glare 1 percent haze, 3H hard coating18/7 operating time, landscape onlyThree HDMI 2.0 inputs, 2x 5 W speakers54 W on mode, under 0.5 W standby

Sized at 55 inches, the VA-5501 is a slim bezel 4K UHD digital signage display; the carton states a panel size of 54.6 inches. The IPS panel runs at 350 cd/m² behind an anti-glare treatment with 1 percent haze and a 3H hard coating, and the aspect ratio is 16:9. Only landscape orientation is specified, with an internal operating time of 18/7. Two 5 W speakers are built in, horizontal frequency covers 31 to 136 kHz and vertical frequency 29 to 61 Hz. Power consumption reaches 80 W in operation and stays below 0.5 W in standby. The VESA pattern is 200 x 100 mm with the WMK-05 wall mount specified, and the unit measures 1226.8 x 720.3 x 85.3 mm without its base. 55-inch 4K UHD with slim bezelIPS panel, 350 cd/m², 16:9Anti-glare 1 percent haze, 3H hard coating18/7 operating time, landscape onlyVESA 200 x 100 mm, WMK-05 wall mount80 W on mode, under 0.5 W standby