Switch DIN-Sch., 1G, Mmt., L3, erw Temp
Price after sign-in
Prices and conditions are shown once you sign in with your customer account.
Sign inNot in stock · delivery 1-2 days
Matching accessories
The AC-SFP-BIA-FXME carries 100 MBit/s across one multimode fibre and is connected through an LC/PC simplex connector. Its transmit wavelength is 1310 nm, the receive wavelength 1550 nm, and the link may span up to 2 km. Optical output power ranges from -10 dBm to 0 dBm, while sensitivity is -28 dBm at an input power of no more than 0 dBm. An optical budget of 18 dB is available with a minimum path attenuation of 0 dB. The module works between -40 °C and +85 °C and dissipates 4 BTU/h. 100 MBit/s data rateMultimode, 1 fibreLC/PC simplex connectorTX 1310 nm / RX 1550 nmUp to 2 km link distance18 dB optical budget
Not in stock · delivery 1-2 days
The AC-SFP-BIA-FXSE is built for singlemode links of up to 20 km and moves 100 MBit/s over a single fibre. It plugs in via LC/PC simplex, transmitting at 1310 nm and receiving at 1550 nm. Output power sits between -14 dBm and -8 dBm, optical sensitivity is -32 dBm and input power may reach 0 dBm. The optical budget amounts to 18 dB at a minimum path attenuation of 0 dB. Operation is rated from -40 °C to +85 °C with a thermal power loss of 4 BTU/h. 100 MBit/s data rateSinglemode, 1 fibreUp to 20 km link distanceTX 1310 nm / RX 1550 nm-32 dBm optical sensitivity18 dB optical budget
Not in stock · delivery 1-2 days
The AC-SFP-BIA-LXE provides 1 GBit/s on one singlemode fibre. Connected through LC/PC simplex, it bridges distances of up to 20 km, transmitting at 1310 nm and receiving at 1550 nm. Output level covers -9 dBm to -3 dBm, sensitivity is -21 dBm and input power must stay at or below -3 dBm. The specified optical budget is 12 dB with a minimum path attenuation of 0 dB. Operating temperature spans -40 °C to +85 °C at 4 BTU/h thermal power loss. 1 GBit/s data rateSinglemode, 1 fibreUp to 20 km link distanceLC/PC simplex connector12 dB optical budget-40 °C to +85 °C operating range
Not in stock · delivery 1-2 days
The AC-SFP-BIA-SXE is a gigabit SFP for short multimode runs of no more than 550 m. It works on a single fibre with an LC/PC simplex connector, sending at 1310 nm and receiving at 1550 nm. Optical output power lies between -8 dBm and 0 dBm, sensitivity is -18 dBm and maximum input power 0 dBm. The optical budget covers 10 dB with 0 dB minimum path attenuation. The module is approved from -40 °C to +85 °C and dissipates 4 BTU/h. 1 GBit/s data rateMultimode, 1 fibreUp to 550 m link distanceTX 1310 nm / RX 1550 nm10 dB optical budget4 BTU/h thermal power loss
Not in stock · delivery 1-2 days
As the counterpart to the A side, the AC-SFP-BIB-FXME transmits at 1550 nm and receives at 1310 nm. It handles 100 MBit/s on one multimode fibre with an LC/PC simplex connector, over a maximum distance of 2 km. Output power spans -10 dBm to 0 dBm, optical sensitivity is -28 dBm and input power tops out at 0 dBm. An optical budget of 18 dB is available at 0 dB minimum path attenuation. The temperature range runs from -40 °C to +85 °C at 4 BTU/h thermal power loss. 100 MBit/s data rateMultimode, 1 fibreTX 1550 nm / RX 1310 nmUp to 2 km link distance18 dB optical budgetLC/PC simplex connector
Not in stock · delivery 1-2 days
Forming the B side of a singlemode link, the AC-SFP-BIB-FXSE transmits at 1550 nm and receives at 1310 nm. One fibre and an LC/PC simplex connector carry 100 MBit/s across as much as 20 km. Output level ranges from -14 dBm to -8 dBm, sensitivity is -32 dBm and maximum optical input power 0 dBm. The optical budget comes to 18 dB with a minimum path attenuation of 0 dB. Rated operation covers -40 °C to +85 °C at 4 BTU/h thermal power loss. 100 MBit/s data rateSinglemode, 1 fibreTX 1550 nm / RX 1310 nmUp to 20 km link distance-32 dBm optical sensitivity18 dB optical budget
Not in stock · delivery 1-2 days
The AC-SFP-BIB-LXE delivers 1 GBit/s on a single singlemode fibre over distances of up to 20 km. It sends at 1550 nm, receives at 1310 nm and plugs in through LC/PC simplex. Optical output power stays within -9 dBm to -3 dBm, sensitivity is -21 dBm and permissible input power reaches -3 dBm at most. A 12 dB optical budget and a minimum path attenuation of 0 dB are specified. The module runs from -40 °C to +85 °C and gives off 4 BTU/h. 1 GBit/s data rateSinglemode, 1 fibreTX 1550 nm / RX 1310 nmUp to 20 km link distance12 dB optical budgetLC/PC simplex connector
Not in stock · delivery 1-2 days
The AC-SFP-BIB-SXE targets multimode connections of up to 550 m and transports 1 GBit/s over one fibre. Its transmit path runs at 1550 nm and its receive path at 1310 nm, using an LC/PC simplex connector. Output power extends from -8 dBm to 0 dBm, optical sensitivity is -18 dBm and maximum input power 0 dBm. The optical budget is 10 dB at a minimum path attenuation of 0 dB. Operation is intended for -40 °C to +85 °C with 4 BTU/h thermal power loss. 1 GBit/s data rateMultimode, 1 fibreUp to 550 m link distanceTX 1550 nm / RX 1310 nm10 dB optical budget4 BTU/h thermal power loss
Not in stock · delivery 1-2 days
Two multimode fibres and an LC/PC duplex connector are used by the AC-SFP-FXMME. Both the transmit and the receive path operate at 1310 nm, the data rate is 100 MBit/s and the reach ends at 2 km. Optical output power moves between -23.5 dBm and -14 dBm, sensitivity is -31 dBm and the highest permitted input power -8 dBm. This yields an optical budget of 7.5 dB at 0 dB minimum path attenuation. The operating range covers -40 °C to +85 °C and the net weight is 0.015 kg. 100 MBit/s data rateMultimode, 2 fibresLC/PC duplex connector1310 nm TX and RXUp to 2 km link distance7.5 dB optical budget
In stock, ships immediately · delivery 1-2 days
The AC-SFP-FXSME covers singlemode links of as much as 30 km at a data rate of 100 MBit/s. It occupies two fibres through an LC/PC duplex connector and uses 1310 nm in both directions. Output level lies between -15 dBm and -8 dBm, optical sensitivity is -32 dBm and maximum input power 0 dBm. The optical budget adds up to 17 dB with a minimum path attenuation of 0 dB. The module can be used from -40 °C to +85 °C at 4 BTU/h thermal power loss. 100 MBit/s data rateSinglemode, 2 fibresUp to 30 km link distance1310 nm TX and RX17 dB optical budgetLC/PC duplex connector
Not in stock · delivery 1-2 days
The AC-SFP-LX-E-10 moves 1 GBit/s across two singlemode fibres and reaches up to 10 km. Both directions work at 1310 nm and the connection is made through LC/PC duplex. Optical output power ranges from -9 dBm to -3 dBm, sensitivity is -21 dBm and maximum input power -3 dBm. The link is rated with a 12 dB optical budget and 0 dB minimum path attenuation. The module is specified from -40 °C to +85 °C and dissipates 4 BTU/h. 1 GBit/s data rateSinglemode, 2 fibresUp to 10 km link distance1310 nm TX and RX12 dB optical budgetLC/PC duplex connector
In stock, ships immediately · delivery 1-2 days
The AC-SFP-LX-E-20 builds gigabit links over two singlemode fibres for distances of up to 20 km. Both directions run at 1310 nm and the connector is LC/PC duplex. Output level covers -8 dBm to -2 dBm, optical sensitivity is -23 dBm and input power may not exceed -1 dBm. The optical budget stands at 15 dB with a minimum path attenuation of 0 dB. Its operating range spans -40 °C to +85 °C and the net weight is 0.018 kg. 1 GBit/s data rateSinglemode, 2 fibresUp to 20 km link distance15 dB optical budget-23 dBm optical sensitivityLC/PC duplex connector
Not in stock · delivery 1-2 days
Designed for long singlemode runs of up to 40 km, the AC-SFP-LX-E-40 carries 1 GBit/s over two fibres. Transmit and receive wavelengths are both 1310 nm and the module uses an LC/PC duplex connector. Output power lies between -4 dBm and 3 dBm, sensitivity is -24 dBm and maximum input power -1 dBm. Its optical budget is 20 dB, and a minimum path attenuation of 4 dB is required. Operation runs from -40 °C to +85 °C at 4 BTU/h thermal power loss. 1 GBit/s data rateSinglemode, 2 fibresUp to 40 km link distance20 dB optical budget4 dB minimum path attenuation1310 nm TX and RX
Not in stock · delivery 1-2 days
Spanning as much as 70 km on two singlemode fibres, the AC-SFP-LX-E-70 works at 1550 nm in both directions. The data rate is 1 GBit/s and the connection is LC/PC duplex. Optical output power extends from 0 dBm to 5 dBm, sensitivity is -30 dBm and input power must not exceed -9 dBm. With a 30 dB optical budget and a required minimum path attenuation of 14 dB, the module is tuned to long links. The temperature range covers -40 °C to +85 °C. 1 GBit/s data rateSinglemode, 2 fibresUp to 70 km link distance1550 nm TX and RX30 dB optical budget14 dB minimum path attenuation
Not in stock · delivery 1-2 days
The AC-SFP-SX-E is a gigabit module for two multimode fibres with a reach of up to 550 m. It operates at 850 nm in both directions and connects via LC/PC duplex. Output power lies between -9.5 dBm and -4 dBm, optical sensitivity is -18 dBm and maximum input power 0 dBm. The optical budget comes to 8.5 dB at 0 dB minimum path attenuation. Operation is foreseen from -40 °C to +85 °C with 4 BTU/h thermal power loss. 1 GBit/s data rateMultimode, 2 fibresUp to 550 m link distance850 nm TX and RX8.5 dB optical budgetLC/PC duplex connector
In stock, ships immediately · delivery 1-2 days
On two multimode fibres the AC-SFP-SXOM3-E achieves 1 GBit/s over a distance of up to 2 km. Transmit and receive wavelengths are 1310 nm and the module uses an LC/PC duplex connector. Output level moves between -23.5 dBm and -14 dBm, sensitivity is -31 dBm and maximum input power -8 dBm. A 7.5 dB optical budget and 0 dB minimum path attenuation are specified. The module is rated from -40 °C to +85 °C and has a gross weight of 0.023 kg. 1 GBit/s data rateMultimode, 2 fibresUp to 2 km link distance1310 nm TX and RX7.5 dB optical budgetLC/PC duplex connector
Not in stock · delivery 1-2 days
Product data
- Manufacturer
- Barox
- Article number
- RY-804GBTME
- Weight
- 1 kg
- Dimensions (W×H×D)
- 62 × 135 × 130 mm
Description
This fanless industrial switch for DIN rail mounting is managed, operates on Layer 2 and Layer 3 and supports DMS. Two or more of its connections can build fault-tolerant optical fibre rings to IEEE802.x, and after an interruption the ring closes again in less than 50ms. Eight copper ports of 10/100/1000TX with RJ45, Auto MDI/MDIX and auto-negotiation are provided alongside four SFP slots for 100/1000, plus an RS232 console port at 115,2kBit/s (8, N, 1, RJ45) and one digital input and one digital output contact. Backplane capacity is 24 GBit/s at a forwarding rate of 17.9 Mpps, the MAC table holds 8k entries, jumbo frames up to 9600 bytes are supported even at 100 Mbit/s, and PTP to IEEE1588 v2 and IEC 61588 is implemented. Redundant power of 12-50VDC is wired via screw terminals with 15W maximum consumption, and operation is permitted from -40°C to +75°C at 5% to 95% relative humidity, non-condensing.
- DIN rail mounting, fanless, Layer 2/3 with DMS
- 8 x 10/100/1000TX, RJ45 and 4 x 100/1000 SFP
- Ring structure, recovery in less than 50ms
- Backplane 24 GBit/s, forwarding rate 17.9 Mpps
- PTP to IEEE1588 v2 and IEC 61588
- Redundant supply 12-50VDC, max. 15W
Made by
Barox from Switzerland builds network technology for video security: managed and unmanaged PoE switches for desktop, 19" rack, DIN rail and outdoor cabinets with an extended temperature range, fibre media converters, PoE injectors and midspans, coax and Ethernet extenders for moving analogue installations to IP, plus industrial and redundant power supplies. AI4Vision is an authorised distributor; every device comes with technical data and its data sheet, trade prices after login.
Notes
For technical specifications and product characteristics, only the details in the manufacturer's current product datasheet are authoritative. Illustrations may differ from the scope of delivery.
Specifications
- Alarm contacts
- The switch has a digital input contact and a digital output contact, , The input allows an SNMP trap or an email to be sent, or the output contact to be switched., An input voltage of 0 VDC to 6 VDC is interpreted as 0, An input voltage of 10 VDC to 24 VD
- Backplane
- 24 GBit/s
- Configuration
- Web GUI, DMS, SNMPv1, v2c and v3, console, Telnet, RMON, individual management interfaces can be disabled
- Console port
- RS232, 115,2kBit/s, 8, N, 1, RJ45
- Copper ports
- 8 x 10/100/1000TX, RJ45, Auto MDI/MDIX, Auto-Negotiation,
- Dimensions
- 135x62x130mm (HxBxL)
- Feeding
- Redundant, 48VDC, 12VDC, 24VDC
- Forwarding Rate
- 17.9 Mpps
- Installation method
- DIN rail mounting
- Jumbo Frames
- Jumbo frames of up to 9600 bytes are also supported at 100 Mbps.
- Kommunikationsredundanz
- Standard Spanning Tree (STP), IEEE802.1d, Rapid Spanning Tree (RSTP), IEEE802.w, Multiple Spanning Tree (MSTP), IEEE802.1s, Ethernet Linear Protection Switching (ELPS), ITU-T G.8031, Ethernet Ring Protection Switching, (ERPS), ITU-T G.8032
- LWL Ports
- 4 x 100/1000, SFP, , we recommend using our barox SFPs. We neither test nor guarantee the compatibility of our devices with SFPs from other manufacturers.
- Layer 3 functions
- IPv4 and IPv6 unicast: static routing
- Life cycle
- Normal
- Link Aggregation
- 802.3ad LACP, static Trunk, 12 Gruppen à 16-Ports
- MAC Tabelle
- 8k
- MTBF
- 25°C: 951'258h, 75°C: 193'332h
- Management
- Management
- Multicast
- IGMP v1/v2/v3 snooping, IGMP limits bandwidth-intensive multicast traffic to the requesters. Supports 1024 multicast groups., , IGMP querier, the IGMP querier is used to support a layer 2 multicast domain of snooping switches
- Operating temperature
- -40°C to +75°C, rel. humidity: 5% to 95%, non-condensing,
- PoE
- No PoE
- PoE ports
- No PoE
- Port settings
- Per Port: Port disable/enable, Auto negotiation 10/100/1000, Full- & halfduplex, Flow Control disable/enable, data rate
- Port status indication
- Per Port: Data rate, Duplex, Link, Flow Control, Auto Negotiation, Trunk
- Power consumption
- Max. 15W
- QoS
- Hardware queue, supports eight hardware queues., , Classification, port-based: traffic QoS by port, 802.1p: the layer 2 CoS class of service based on VLAN priority is a parameter used in data and voice protocols
- Security
- Certified authentication, a private HTTPS key can be stored for management access., , User management, user rights can be set freely across up to 15 levels., , ACL, the switch allows up to 512 entr
- Standards
- 802.3, 10Base-T Ethernet, 802.3u, 100BaseTX and100BaseFX Fast Ethernet, 802.3ab, 1000Base-T, 802.3z, 1000Base-X, 802.3x, Flow Control and Back Pressure, 802.1d, Spanning Tree, 802.1w, Rapid Spanning Tree, 802.1s, Multiple Spanning Tree, ITU-TG.8032 / Y.13
- Supply voltage
- 12-50 VDC, redundant supply possible, screw terminals
- Test standards
- EMV: IEC61000-4-2, 4-3, 4-4, 4-5, 4-6, 4-8 , EMI: FCC Part 15 Class A, EN61000-3-2, -3-3, -6-4, EN55022, EN55011 , Freier Fall: IEC60068-2-32 , Schock: IEC60068-2-27 , Vibration: IEC60068-2-6 , Bahn Norm: EN50121-4:2016, EN50155:2017, Transport: NEMA
- VLAN
- Tag-based VLAN per 802.1Q, supports up to 4K VLANs simultaneously (of 4096 VLAN IDs), , port-based VLAN, a port member of a VLAN can be isolated from other isolated ports of the same VLAN and from private VLANs., , Private VLAN edge (P
- Weight
- Gross weight: 1.00 kg, net weight: 0.76 kg