90W bt PoE Switches

Unmanaged ceiling switch with five PoE outputs and one PoE input. The switch is itself powered over PoE class 8 (bt) and passes the power on to one bt port and four at ports, so no separate power supply is needed at the ceiling. LEDs show port state directly, which shortens commissioning overhead. Forwarding capacity is 8.928 Mpps at 12 Gbit/s switching capacity. Round housing, 185.16 mm diameter and 90 mm high, weight 0.8 kg, operating temperature 0 °C to 50 °C. Five PoE outputs, one PoE inputPowered over PoE class 8 (bt), no socket neededOne bt output and four at outputsLED per port for commissioning8.928 Mpps, 12 Gbit/s switching capacityRound, 185.16 mm diameter, 90 mm high, 0.8 kg

Unmanaged ceiling switch with five PoE outputs and one PoE input, in the version with daisy chaining and additional DC outputs. The switch is powered over PoE class 8 (bt) and passes the power on to one bt port and four at ports. The daisy-chain function carries PoE up to 300 m over Cat 5e or Cat 6, so several units can be run in series. Two terminal outputs are provided as well: 12 V / 2.5 A and 24 V / 1.25 A. Forwarding capacity 8.928 Mpps at 12 Gbit/s switching capacity. Round housing, 185.16 mm diameter, 90 mm high, weight 1 kg, operating temperature 0 °C to 50 °C. Five PoE outputs, one PoE input, bt poweredDaisy chain: PoE up to 300 m over Cat 5e/6Two terminal outputs, 12 V / 2.5 A and 24 V / 1.25 AOne bt output and four at outputs8.928 Mpps, 12 Gbit/s switching capacityRound, 185.16 mm diameter, 90 mm high, 1 kg

1,25 Gbit/s transceiver in SFP form factor for Multimode 50/125 µm und 62,5/125 µm, wavelength 850 nm, reach up to 0,5 km, LC connector. The operating temperature range is 0 °C bis 70 °C; the module draws 3.3 V from the slot. It is intended for the AETEK switches with SFP slots and is hot-pluggable. 1,25 Gbit/s, wavelength 850 nmFor Multimode 50/125 µm und 62,5/125 µmReach up to 0,5 kmLC connectorOperating temperature 0 °C bis 70 °C3.3 V supplied by the slot

SFP module for multimode cabling inside a campus: 1.25 Gbps at 1310 nm over 50/125 μm or 62.5/125 μm fibre across 2 km. An FP laser diode transmits between -5 and -15 dBm, the receive window runs from -3 to -20 dBm, and the connector is LC. Supply 3.3 V, operating range 0 °C to 70 °C, storage -40 °C to 85 °C, humidity 5 to 90 % non-condensing. Size 55.9 x 14.69 x 12.39 mm, MSA compliant, approved to EN60825-1, IEC 825 and FDA 21 CFR 1040.10/1040.11.

1,25 Gbit/s transceiver in SFP form factor for Singlemode 9/125 µm, wavelength 1310 nm, reach up to 10 km, LC connector. The operating temperature range is 0 °C bis 70 °C; the module draws 3.3 V from the slot. It is intended for the AETEK switches with SFP slots and is hot-pluggable. 1,25 Gbit/s, wavelength 1310 nmFor Singlemode 9/125 µmReach up to 10 kmLC connectorOperating temperature 0 °C bis 70 °C3.3 V supplied by the slot

SFP module for single-mode spans of up to 40 km on 9/125 μm fibre. It runs 1.25 Gbps at 1310 nm, transmits from a DFB laser diode at -3 to 3 dBm and receives between -3 and -24 dBm, with the fibre landing on an LC connector. Supply is 3.3 V; operating range 0 °C to 70 °C, storage -40 °C to 85 °C, humidity 5 to 90 % non-condensing. Housing size 55.9 x 14.69 x 12.39 mm, MSA compliant, approved to EN60825-1, IEC 825 and FDA 21 CFR 1040.10/1040.11.