Power supplies for DIN rail mounting

Five 10/100/1000TX copper ports, four of them with PoE+ to 802.3af/at and one without PoE, together with two 1G SFP slots characterise this robust industrial switch. Across all ports the switch delivers a maximum of 120W PoE; the uplink to a video control centre runs either over copper or over two optional SFPs with multimode or singlemode fibres. A 14GBit/s backplane and support for jumbo frames up to 9600 bytes even at 100MBit/s are aimed at video transport with every port occupied, and the MAC table holds 4k entries. Supply is 48-56VDC with redundancy possible, drawing at most 6W without PoE and up to 130W at full PoE load. At -40°C to +75°C, IP30, 49 BTU/h, 142x36x105mm (HxWxL) and 0.72 kg net, DIN rail, table and wall mounting are all possible. 4 x 10/100/1000TX with PoE+ 802.3af/at, 1 x without PoE2 x 1G SFP slotsMaximum PoE power across all ports: 120WBackplane 14GBit/s, MAC table 4k, jumbo frames up to 9600 bytesSupply 48-56VDC, redundant, max. 130W at full load

A built-in voltage converter lets this industrial switch, PoE included, run from 12-56VDC, and redundant feeding is possible. The port complement covers four 10/100/1000TX copper ports with PoE+ to 802.3af/at, one 10/100/1000TX copper port without PoE and two 1G SFP slots that accept multimode or singlemode optics. For video transport it offers a 14GBit/s backplane, a MAC table of 4k entries and jumbo frames up to 9600 bytes even at 100MBit/s. Own consumption is at most 6W without PoE and reaches 130W at full PoE load, with a thermal loss of 49 BTU/h. The unmanaged device works from -40°C to +75°C in IP30, measures 142x36x105mm (HxWxL) and weighs 0.74 kg net, mounting on a DIN rail, table or wall. Built-in voltage converter, 12-56VDC supply, redundant4 x 10/100/1000TX with PoE+ 802.3af/at, 1 x without PoE2 x 1G SFP slotsBackplane 14GBit/s, MAC table 4kOperating temperature -40°C to +75°C, IP30

The PC-PITE502-2 carries four 10/100/1000TX copper ports with PoE++ to 802.3af/at/bt, each able to deliver up to 90W, plus two 1G SFP uplinks. A maximum PoE power of 240W is permitted across all ports, so cameras with a high power demand can be fed directly. For the optical uplink the SFPs may be fitted for multimode or singlemode, using one or two fibres. The backplane achieves 14GBit/s with a MAC table of 4k entries and jumbo frames up to 9600 bytes even at 100MBit/s. Supply is 48-56VDC with redundancy possible, consuming 6W without PoE and 240W at full load; the unit works from -40°C to +75°C in IP30, measures 142x36x105mm (HxWxL) and weighs 0.71 kg net. 4 x 10/100/1000TX with PoE++ 802.3af/at/bt, up to 90W per portMaximum PoE power across all ports: 240W2 x 1G SFP uplinksBackplane 14GBit/s, MAC table 4kSupply 48-56VDC, redundant, 78 BTU/h thermal loss