24xPoE FE+2xGbE Combo EXPoE Switch

1,25 Gbit/s transceiver in SFP form factor for Multimode 50/125 µm und 62,5/125 µm, wavelength 850 nm, reach up to 0,5 km, LC connector. The operating temperature range is 0 °C bis 70 °C; the module draws 3.3 V from the slot. It is intended for the AETEK switches with SFP slots and is hot-pluggable. 1,25 Gbit/s, wavelength 850 nmFor Multimode 50/125 µm und 62,5/125 µmReach up to 0,5 kmLC connectorOperating temperature 0 °C bis 70 °C3.3 V supplied by the slot

SFP module for multimode cabling inside a campus: 1.25 Gbps at 1310 nm over 50/125 μm or 62.5/125 μm fibre across 2 km. An FP laser diode transmits between -5 and -15 dBm, the receive window runs from -3 to -20 dBm, and the connector is LC. Supply 3.3 V, operating range 0 °C to 70 °C, storage -40 °C to 85 °C, humidity 5 to 90 % non-condensing. Size 55.9 x 14.69 x 12.39 mm, MSA compliant, approved to EN60825-1, IEC 825 and FDA 21 CFR 1040.10/1040.11.

1,25 Gbit/s transceiver in SFP form factor for Singlemode 9/125 µm, wavelength 1310 nm, reach up to 10 km, LC connector. The operating temperature range is 0 °C bis 70 °C; the module draws 3.3 V from the slot. It is intended for the AETEK switches with SFP slots and is hot-pluggable. 1,25 Gbit/s, wavelength 1310 nmFor Singlemode 9/125 µmReach up to 10 kmLC connectorOperating temperature 0 °C bis 70 °C3.3 V supplied by the slot

SFP module for single-mode spans of up to 40 km on 9/125 μm fibre. It runs 1.25 Gbps at 1310 nm, transmits from a DFB laser diode at -3 to 3 dBm and receives between -3 and -24 dBm, with the fibre landing on an LC connector. Supply is 3.3 V; operating range 0 °C to 70 °C, storage -40 °C to 85 °C, humidity 5 to 90 % non-condensing. Housing size 55.9 x 14.69 x 12.39 mm, MSA compliant, approved to EN60825-1, IEC 825 and FDA 21 CFR 1040.10/1040.11.