10G SFP+ Transceiver

Managed L2 PRO switch with twelve SFP+ slots for 1 or 10 Gbit/s and no copper ports. It is intended as a root switch connecting the H60 outdoor switches, the D60 industrial switches and the C60 indoor switches to the surveillance network. All twelve ports are fibre, which suits star wiring over longer distances. The switch is managed through the NTS interface: it discovers ONVIF cameras by itself, draws the topology, shows state, power draw and cable diagnostics per port and allows PoE to be switched off and on. An installer therefore needs no deep knowledge of managed switch configuration. Switching capacity 240 Gbit/s, forwarding capacity 178.571 Mpps, MAC table 32 K, jumbo frames to 12 K. 19-inch form, 441 × 131 × 44 mm, weight 2.8 kg, operating temperature 0 °C to 50 °C. Twelve SFP+ slots for 1 or 10 Gbit/sRoot switch for the H60, D60 and C60 series240 Gbit/s switching capacity, 178.571 MppsNTS interface with ONVIF camera discovery32 K MAC table, jumbo frames to 12 K441 × 131 × 44 mm, 2.8 kg, 19-inch form

Managed L2 PRO switch with 24 Gigabit RJ45 ports and four SFP+ slots for 1 or 10 Gbit/s. Like the C60-00B-01 it is intended as a root switch for the H60, D60 and C60 series, but offers copper ports instead of fibre only and so suits distribution inside the equipment room. It does not supply PoE. The switch is managed through the NTS interface: it discovers ONVIF cameras by itself, draws the topology, shows state, power draw and cable diagnostics per port and allows PoE to be switched off and on. An installer therefore needs no deep knowledge of managed switch configuration. Switching capacity 128 Gbit/s, forwarding capacity 95.232 Mpps, power draw 10 W. 19-inch form, 441 × 196 × 44 mm, weight 3.1 kg, operating temperature 0 °C to 40 °C. 24 Gigabit RJ45 ports and four SFP+ slotsRoot switch for the H60, D60 and C60 series128 Gbit/s switching capacity, 95.232 MppsNTS interface with ONVIF camera discoveryNo PoE supply, 10 W power draw441 × 196 × 44 mm, 3.1 kg, 0 °C to 40 °C

Managed L2 PRO switch with 24 Gigabit PoE ports up to 30 W and four SFP+ slots for 1 or 10 Gbit/s. Against the C60-244-30-370-V2 the difference is the uplink: four SFP+ slots instead of two SFP and two combo ports. That allows a 1 Gbit/s uplink now and a move to 10 Gbit/s fibre later without replacing the switch. The switch is managed through the NTS interface: it discovers ONVIF cameras by itself, draws the topology, shows state, power draw and cable diagnostics per port and allows PoE to be switched off and on. An installer therefore needs no deep knowledge of managed switch configuration. The PoE budget is 370 W, the switching capacity 128 Gbit/s and the forwarding capacity 95.232 Mpps. Power draw without PoE is 12.5 W. Dimensions 441 × 270 × 45 mm, weight 4.1 kg. 24 Gigabit PoE ports up to 30 WFour SFP+ slots for 1 or 10 Gbit/sMove to 10 Gbit/s fibre without replacing the switch370 W PoE budget, 128 Gbit/s switching capacity95.232 Mpps forwarding, 12.5 W without PoE441 × 270 × 45 mm, 4.1 kg